Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WAL123S1A2

WAL123S1A2 Frigidaire Air Conditioner - Overview

Get Parts and Repair Help for WAL123S1A2

If you know the air conditioner repair part you need, you can browse the list of all parts on the WAL123S1A2, or you can search by name or part description. You can also find your part by where it is located on the WAL123S1A2 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

KNOB-CONTROL

$63.49

Fan Blade

This is a fan blade and it is made for an air conditioner unit, it may also be known as a room condenser fan. The blade is black and has a roughly 13-inch outer diameter. The function of this piece is to blow air over the condenser, which will cool the refrigerant and eventually cool the area. The tools you will need to make this repair include a pair of pliers, a screwdriver set, and a socket set. Before making this repair, make sure to unplug your air conditioning unit.

SWITCH-SELECTOR

$5.53

SCREW

$8.41

CLIP

Blower Wheel

Part may differ in appearance, but functions same as original part.

$8.43

CLAMP

$131.88

Temperature Control Thermostat

$3.54

SCREW

$15.34

SEAL

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

the selector switch knob stem broke off

  • Customer: David from Gretna, LA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 14 of 19 people found this instruction helpful
well i first had to removed the screws that holds the housing for the selector control switch, then i notice seven wires connected to the switch, so then i removed one to one(removed one connect one ) until i got it all done. then put it all back together, it was very easy............. read more

control knobs broken

  • Customer: Richard from Woodbridge, NJ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
ordered 2 knobs alike; got sent 2 knobs not alike; but was able to utilize both. Now no longer need pliers to turn a/c on and off. read more

condenser fan broken

  • Customer: James from Canyon, TX
  • Difficulty: Really Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set
  • 3 of 6 people found this instruction helpful
pulled the cover off a/c, removed shroud covering fan. replaced the fan, reassembled a/c. works great.ty read more