Models
>
WAL100K1A1
WAL100K1A1 Westinghouse Air Conditioner - Overview
Sections of the WAL100K1A1
[Viewing 6 of 6]Manuals & Care Guides for WAL100K1A1
Click to downloadKeep searches simple, eg. "belt" or "pump".
Fan Blade
PartSelect #: PS819849
Manufacturer #: 309651003
This is a fan blade and it is made for an air conditioner unit, it may also be known as a room condenser fan. The blade is black and has a roughly 13-inch outer diameter. The function of this piece is...
$135.57
Special Order
Vertical Louver
PartSelect #: PS611483
Manufacturer #: 309342001
The louvers are located behind the grille attached to a link. They are used to control the air flow, increase heating and cooling efficiency of the air conditioner. They can be open or closed by using...
$6.30
In Stock
Questions And Answers for WAL100K1A1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
condenser fan broken
pulled the cover off a/c, removed shroud covering fan. replaced the fan, reassembled a/c. works great.ty
Parts Used:
-
James from Canyon, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Socket set
3 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cheap capacitor blew up
removed unit out of cabnet, removed three retaining screws disconnect bad unit and installed the new one gave it a trail run a few minutes replaced screws and placed unit back in cabnet, work great. thanks
Parts Used:
-
Robert L from Bonaire, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The was piece of the fan that was broken off.
First removed the screw that held the ac together and then took old fan off replaced with new one.
Parts Used:
-
Stephanie from Dorchester, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!