Models > WAC052K7A6 > Instructions

WAC052K7A6 Westinghouse Air Conditioner - Instructions

All installation instructions for WAC052K7A6 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the air conditioner repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the WAC052K7A6
1-15 of 16
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Tore old shutter panel

  • Customer: Stephen from Revere MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 7 of 10 people found this instruction helpful
Just slid out old and replaced with new, parts were ordered Sunday night , had them Tuesday , Fast service.

The old shutter panels were corroded (rubber rot) and fell apart, once expanded.

  • Customer: Louis from Westwood NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 4 people found this instruction helpful
Very easily, I just removed the remainder of the accordion shaped panels from the frames, the slots on the a/c case exterior and in the process, slid out the frames completely from the a/c case exterior. I then completely cleaned the rubber residue from the frames, took the new Shutter Panels, "clicked" the one side of each back into each of the frames and then slid the other side of the Shutter Panels into the slots on the a/c case exterior, while positioning the frames into the slots on the top and bottom of the a/c case exterior. They just slide easily into place and I installed the a/c in the window, as usual and extended the frames with the new Shutter Panels as usual.

VERY VERY EASY FIX! Great site, showing the blow-up diagrams for any part you need to verify. Arrived much quicker than expected and reasonably priced. OUTSTANDING! Would highly recommend for any self-help appliance repair.

My shutter panels were broken/ripped

  • Customer: Hai-Phung from New York NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 12 people found this instruction helpful
It was very easy, just slide the side panel frames out, slide the old shutters out, slide and secure the new ones in, and slide the entire frame back onto the AC unit and it was as good as new.

The accordian part of the side extension panel tore

  • Customer: Wayne from New Alexandria PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 5 people found this instruction helpful
All that you have to do is slide the old part out that attaches to the cabinet of the air conditioner and slide in the new. You first slide in the accordian part of the extention panels and then the two plastic sections into the rails that hold them in place. No tools are required. Just make sure that you order the correct panel that needs to be replaced.

Both side extensions had broken off.

  • Customer: Kathleen from Philadelphia PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 5 people found this instruction helpful
Very easy! Just slide out the old and slide in the new! Thanks for your great service!

worn/old panels

  • Customer: LOUIS from MALVERN PA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
extened frames and replaced old panels.

the extensions on the AC unit riped.

  • Customer: Tamatha from Boalsburg PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 3 people found this instruction helpful
the old ones just slipped out and the new ones went on like a glove.---a no brainer project!

shutter panel had to be replaced

  • Parts Used: