Quick Question!

Have you ever purchased from PartSelect.com before?

Models > W2450W

W2450W Jenn-Air Wall Oven - Overview

Get Parts and Repair Help for W2450W

If you know the wall oven repair part you need, you can browse the list of all parts on the W2450W, or you can search by name or part description. You can also find your part by where it is located on the W2450W by selecting a section below. We’ve also included any installation videos we have for W2450W parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 3 hrs and your part ships today!
$21.46

2 Piece Broiler Pan

The top of this part is now black.

Order within the next 3 hrs and your part ships today!
$47.41

Light Switch

This light switch is located in the door of the oven.

Order within the next 3 hrs and your part ships today!
$4.94

Screw

This screw is sold individually.

Order within the next 3 hrs and your part ships today!

Oven Door Handle End Cap

This end cap is just under two inches long. It is white in color and is made of plastic. Two of these end caps are required for an oven door, but they are sold separately.

Door Latch with Screws

The part may be different in color but will function the same as the orginal.

Retainer Clip

BUSHING

Door Lock Latch Solenoid

This door lock solenoid is used with self-clean ovens. It is designed to lock the oven door, and will not open until sufficient cooling time has elapsed.

$20.81

INSULATOR

This insulator is used to protect the switch that is attached to the switch shield.

Order within the next 3 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

seal was black and stiff from burned in spilled grease and sauce

  • Customer: Rosemary from Pawleys Island, SC
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 27 of 42 people found this instruction helpful
Unscrewed and pulled the door off and then took the three layers of the door apart in order to clean off the burned-on goop and remove the old and insert the new seal. The last screw was rusted in and the drill stripped it so that it was impossible to remove. I levered the remaining two layers apart, holding them open with screw drivers, and inserted the... read more

Old seal torn

  • Customer: Robert from Boston, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 13 of 18 people found this instruction helpful
Older model oven with model number worn off. Photo with the 1" grid made it possible for me to find the right size part.

You only need a phillips head screwdriver to install this seal, but it is a bit tricky to line up the new seal and the fiberglass insulation inside the door, so take your time and make sure everything lines up and is tucked in ... read more

Outer glass in the oven door window shattered

  • Customer: David from Durham, NC
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 10 of 12 people found this instruction helpful
1.remove the trim around the door (8 screws)
2.remove over glass panel (part with the handle)
Caution; the springs on the door are exactly set for the weight of the door. When we removed the outer glass panel, I almost killed my wife when the door slammed shut.
3.Remove inner metal cover (6-8 screws).some of these screws were baked pretty ti... read more