Quick Question!

Have you ever purchased from PartSelect.com before?

Models > W206W

W206W Jenn-Air Wall Oven - Overview

Parts and Repair Help for models starting with W206W

If you know the wall oven repair part you need, you can browse the list of all parts for models starting with W206W, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for W206W parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with W206W

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$21.46

2 Piece Broiler Pan

The top of this part is now black.

$10.76

Urethan Foam Gasket

$47.41

Light Switch

This light switch is located in the door of the oven.

$44.87

Bake Element

$4.94

Screw

This screw is sold individually.

Oven Door Handle End Cap

This end cap is just under two inches long. It is white in color and is made of plastic. Two of these end caps are required for an oven door, but they are sold separately.

Electonic Clock Assembly

This digital electonic clock assembly is seven and a half inches long. If you are installing this clock into a wall oven, the metalllic support nut on the center switch is not needed. You will have to remove the nut for control panel clearance. However, if you are installing this clock in your range, do not remove the center nut. This clock assembly comes with an instructions sheet and is used for many ranges and wall ovens.

Door Latch with Screws

The part may be different in color but will function the same as the orginal.

Retainer Clip

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

seal was black and stiff from burned in spilled grease and sauce

  • Customer: Rosemary from Pawleys Island, SC
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 27 of 42 people found this instruction helpful
Unscrewed and pulled the door off and then took the three layers of the door apart in order to clean off the burned-on goop and remove the old and insert the new seal. The last screw was rusted in and the drill stripped it so that it was impossible to remove. I levered the remaining two layers apart, holding them open with screw drivers, and inserted the... read more

Old seal torn

  • Customer: Robert from Boston, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 13 of 18 people found this instruction helpful
Older model oven with model number worn off. Photo with the 1" grid made it possible for me to find the right size part.

You only need a phillips head screwdriver to install this seal, but it is a bit tricky to line up the new seal and the fiberglass insulation inside the door, so take your time and make sure everything lines up and is tucked in ... read more

my oven door seal was frayed

  • Customer: Richard from Arlington, TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 12 of 18 people found this instruction helpful
I dissasembled the entire door..lots of screws and watch you dont drop the glass pieces...also keep them in order so you dont get confused on what goes where. I cleaned everything nicely and installed the new seal and everything went together perfectly and looks and works like new. I recieved my part by mail very quickly and the price was MUCH better than ... read more