Models > W206B C

W206B-C Jenn-Air Oven - Overview

Get Parts and Repair Help for W206B-C

If you know the oven repair part you need, you can browse the list of all parts on the W206B-C, or you can search by name or part description. You can also find your part by where it is located on the W206B-C by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for W206B-C parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$2.70

Screw

This screw is sold individually.

$2.70

Screw

This screw is sold individually.

$2.70

Screw

$18.07

2 Piece Broiler Pan

$49.79

Bake Element

This bake element is found on the bottom of the oven.

$104.68

Interior Window Assembly

This part includes 2 panes of glass enclosed in a metal frame. It's the innermost window for your oven door.

$55.91

Oven Door Seal

This oven door seal prevents heat from escaping the oven cavity when in use.

$2.70

SCREW

$4.46

Light Bulb Socket

This light bulb socket is located inside the oven cavity.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

seal was black and stiff from burned in spilled grease and sauce

  • Customer: Rosemary from Pawleys Island SC
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 21 of 33 people found this instruction helpful
Unscrewed and pulled the door off and then took the three layers of the door apart in order to clean off the burned-on goop and remove the old and insert the new seal. The last screw was rusted in and the drill stripped it so that it was impossible to remove. I levered the remaining two layers apart, holding them open with screw drivers, and inserted the... read more

Old seal torn

  • Customer: Robert from Boston MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 7 of 9 people found this instruction helpful
Older model oven with model number worn off. Photo with the 1" grid made it possible for me to find the right size part.

You only need a phillips head screwdriver to install this seal, but it is a bit tricky to line up the new seal and the fiberglass insulation inside the door, so take your time and make sure everything lines up and is tucked in ... read more

Outer glass in the oven door window shattered

  • Customer: David from Durham NC
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 6 of 7 people found this instruction helpful
1.remove the trim around the door (8 screws)
2.remove over glass panel (part with the handle)
Caution; the springs on the door are exactly set for the weight of the door. When we removed the outer glass panel, I almost killed my wife when the door slammed shut.
3.Remove inner metal cover (6-8 screws).some of these screws were baked pretty ti... read more