Quick Question!

Have you ever purchased from PartSelect.com before?

Models > W130 Maytag

W130 Jenn-Air Range - Overview

Get Parts and Repair Help for W130

If you know the range repair part you need, you can browse the list of all parts on the W130, or you can search by name or part description. You can also find your part by where it is located on the W130 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for W130 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$21.46

2 Piece Broiler Pan

The top of this part is now black.

$16.02

Push-Button Clock Knob

$24.62

Thermostat Knob

This black knob will accept a 'D' shaped shaft. It has a red indicator dot as well as light gray lettering denoting the various temperatures and functions of the oven.

$4.94

SCREW

$33.24

Hinge Kit - Left or Right Side

$4.02

Door Glass Spacer

Sold individually.

$52.81

Oven Door Gasket

Latch Lever Clip

$2.80

Glass Clip - Black

This clip helps to hold the exterior glass in place. Order quantity required.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Inner Oven Glass broken

  • Customer: David from Wayne, NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 24 of 32 people found this instruction helpful
I removed two retainer screws which released the outside panel.
Next I removed 2 screws which hold the middle glass pane from one of its retainer brackets.
The was another panel with 4 screws to remove before reaching the final glass inner assembly.
Once that panel was reoved with the broken glass it was time to put the repacement glass assemb... read more

Burned terminal block and filter board

  • Customer: Joseph from Decatur, GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 55 of 126 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more

Element burned out

  • Customer: Anita from Hudson, CO
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 17 of 27 people found this instruction helpful
Unplug Stove removed screws pulled out
element. Lifted off the wires with a pliers they slid
onto the element ends that were pointed up
was very easy. read more