Quick Question!

Have you ever purchased from PartSelect.com before?

Models > W104

W104 Jenn-Air Wall Oven - Overview

Get Parts and Repair Help for W104

If you know the wall oven repair part you need, you can browse the list of all parts on the W104, or you can search by name or part description. You can also find your part by where it is located on the W104 by selecting a section below. We’ve also included any installation videos we have for W104 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$22.22

2 Piece Broiler Pan

The top of this part is now black.

$31.03

Knob Kit

This kit includes the thermostat knob and the oven selector knob.

$47.41

Light Switch

This light switch is located in the door of the oven.

$47.13

Bake Element

$4.89

Screw

This screw is sold individually.

Door Latch with Screws

The part may be different in color but will function the same as the orginal.

Retainer Clip

Mounting Pad

This mounting pad goes behind the oven handle when attaching it to the door.

WASHER

This washer is well under an inch in diameter, and is made entirely of metal.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

seal was black and stiff from burned in spilled grease and sauce

  • Customer: Rosemary from Pawleys Island, SC
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 27 of 42 people found this instruction helpful
Unscrewed and pulled the door off and then took the three layers of the door apart in order to clean off the burned-on goop and remove the old and insert the new seal. The last screw was rusted in and the drill stripped it so that it was impossible to remove. I levered the remaining two layers apart, holding them open with screw drivers, and inserted the... read more

Old seal torn

  • Customer: Robert from Boston, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 13 of 18 people found this instruction helpful
Older model oven with model number worn off. Photo with the 1" grid made it possible for me to find the right size part.

You only need a phillips head screwdriver to install this seal, but it is a bit tricky to line up the new seal and the fiberglass insulation inside the door, so take your time and make sure everything lines up and is tucked in ... read more

Outer glass in the oven door window shattered

  • Customer: David from Durham, NC
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 10 of 12 people found this instruction helpful
1.remove the trim around the door (8 screws)
2.remove over glass panel (part with the handle)
Caution; the springs on the door are exactly set for the weight of the door. When we removed the outer glass panel, I almost killed my wife when the door slammed shut.
3.Remove inner metal cover (6-8 screws).some of these screws were baked pretty ti... read more