Models > VVSR1070DDWW > Instructions

VVSR1070DDWW Hotpoint Washer - Instructions

All Instructions for the VVSR1070DDWW
346 - 352 of 352
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Timer knob was broke
Ordered new knob,came two days later.Really inpressed with their Service.Installed new knob within seconds.Took longer to open the plastic it was in.If you need parts,I would suggest ordering them thru PartSelect.com.
Parts Used:
Timer Knob with Clip
  • Norm from Brilliant, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The GE Washer went dead. It could fill and expel the water only.
After the GE Washer went dead last week Tuesday while my spouse was doing laundry, I I took it to the back yard just to examine the inside from beneath before going to find a new one that evening.
While on its back I notice that the motor still worked but it was very weak. Taking the belt off it went a little faster but weak. Then I remembered that there was supposed to be an electrical part that sends or allows current to go to the motor, but didn't know the name nor what it should look like.
I started my search and found this cylindrical electric part that had a scar on the outside and a hardened mass protruding from the inside. Since the wires to and from the part was the same color, I marked one terminal, then took pictures of the position and wiring of the part I identified as the problem, then took it out of the machine.
At this point, I went to the car, sat inside, started the car, and was about to leave to find a washing machine, then I thought of the Internet. I went on the Internet, found a store that sells GE washing machines parts, identified the part to be the capacitor. I ordered the part late that evening, received it Thursday afternoon, installed and reassembled the machine immediately, and today is the eight day since the fix and as I am writing, Thursday, August 15, 2013, the machine is doing my laundry. The diagrams made it very easy to identify the name of the part, and since I am mechanically inclined, getting the old part out and installing the new part was very easy. ~~ Vasco
Parts Used:
Capacitor
  • Vasco from Carson, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
washer would not stop filling with water
I removed the control panel and front panel of the machine exposing the water level pressure switch and hose. There was a clog in the hose that once cleaned out (with a shish kabab skewer)the problem was solved I didn't even need the switch which I returned and got a full refund no problem.
Parts Used:
Water Level Pressure Switch
  • Annette from Stroudsburg, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
water wouldn't shut off.
My 45 year old son did it in the shop, and it only took a short time before we were washing clothers again, and no water on the floor. The part came through the day after I ordered them. Thank you very much
Parts Used:
Water Level Pressure Switch
  • Ronald from Monroeville, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
Was this instruction helpful to you?
Thank you for voting!
old knob broke
Opened the package - put it on just like the old one. Didn't take 5 minutes. Good as new.
Parts Used:
Timer Knob with Clip
  • Jacquelyn from Bokoshe, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Washing machine smoking!
My washing machine began smoking one day while on spin cycle. I freaked out and turned every breaker off on the electric panel since I, apparently, forgot how to read during this episode. Once the smoke cleared and my brain power returned I removed the front panel of the machine. After a quick look I decided I saw nothing wrong that I could fix. 24 hours later my brain had returned to normal functioning capacity so I decided to turn the power back on to the washer and see what happened. It was then that I noticed the smoke coming from a black cylinder on the front of the washer. I googled my washer and the VERY helpful diagrams from partselect.com came up showing me this was the capacitor. Since as mentioned previously my brain was now functional again I was able to determine this would be an easy fix, ordered the part, got it 24 hours later (!!!!!) with no special shipping, and installed it in 5 minutes. I feel smart today! Thanks Partselect.com!
Parts Used:
Capacitor
  • Erica from Newberry, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
Hot water not working in the washer.
Unplugged the unit. Removed water hoses. Removed 4 "star" screws to open control unit cover. Unscrewed assembly with philips screw driver. Unpluged electric plugs. Used pliers to remove internal hose. Removed bad unit which was plugged with hard water corrison. Reverse steps to reinstall. It worked great. Loved the online ordering and shipping direct to my home.
Parts Used:
Dual Water Inlet Valve
  • Steve from Rapdic City, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the VVSR1070DDWW
346 - 352 of 352