Models > VVSR1040V3WW > Instructions

VVSR1040V3WW Hotpoint Washer - Instructions

All installation instructions for VVSR1040V3WW parts

These instructions have been submitted by other PartSelect customers and can help guide you through the washer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the VVSR1040V3WW
421-422 of 422
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

COLD WATER INLET VALUE DRIPPING/LEAKING

  • Customer: WILLIAM from HAMPTON VA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Unplugged power cord and shut off water supply. Then removed both water hoses from the dual water inlet value using adjustable pliers. Next removed four (4) star screws on top of the control panel. This required the purchase of a #20 Torq Screwdriver from Sears costing $3.99 plus tax etc. Once the top panel lifted upward and to the left I was able to unplug both electricle connections on the water inlet vlaue. Next unscrewed two Phillips head screws holding the water inlet value in place. Installed the new water inlet value in reverse of above. Time to complete was 22 minutes. Very easy repair to accomplish.

Cracked Coupler

  • Customer: Maureen from Warsaw IL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
We were lucky, the agitator came off on its own. Removed the coupler which cracked when a sheet got stuck underneath it! Replaced coupler and new screw/nut combo, popped on agitator. That easy.
All Instructions for the VVSR1040V3WW
421-422 of 422