Models > VP30CW3

VP30CW3 Frigidaire Range - Overview

Parts and Repair Help for models starting with VP30CW3

If you know the range repair part you need, you can browse the list of all parts for models starting with VP30CW3, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for VP30CW3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with VP30CW3

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$34.29

Flat Style Oven Igniter

This flat style gas oven igniter has an amperage range between 3.2 to 3.6.

Order within the next 5 hrs and your part ships today!
$14.62

Light Bulb

This 40 watt appliance light bulb are used for some ranges, refrigerators, and microwaves. They are sold individually.

Order within the next 5 hrs and your part ships today!
$25.30

Oven Light Socket

Order within the next 5 hrs and your part ships today!
$39.80

Spark Module - 120V

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Order within the next 5 hrs and your part ships today!
$37.71

Door Hinge - Left Side

This hinge is located on left side of the oven door.

Order within the next 5 hrs and your part ships today!
$35.71

Hinge - Right Side

Order within the next 5 hrs and your part ships today!
$31.02

Drip Bowl - 8"

Sold individually.

Order within the next 5 hrs and your part ships today!
$51.11

Front Surface Burner

Order within the next 5 hrs and your part ships today!
$53.73

Rear Top Burner

Order within the next 5 hrs and your part ships today!
$87.25

SEAL

Order within the next 5 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven quit heating.

  • Customer: John from Darlington SC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 428 of 448 people found this instruction helpful
After reading up on the problem of the gas oven not lighting I decided I needed to install a new igniter. I had read where some people just pulled a panel off the back and installed a new one.. yeah, no such luck with this model so I had to crawl into the broiler drawer space [which I had to clean out first]. Note, if you wear trifocal glasses you might as ... read more

Oven was difficult to light, then stopped lighting altogether

  • Customer: Ritchie from Ithaca NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 209 of 287 people found this instruction helpful
1. Turned off circuit breaker to stove
2. Removed the two screws holding down the floor of the oven (screws are at back.), and then lifted it out.
3. Removed the nut holding down the flame guard, and lifted it off.
4. Opened the bottom drawer.
5. Removed the protective cover in the back left of the oven at the bottom, first removing the ... read more

Oven Would Not Heat - Oven Ignitor Failure

  • Customer: Peter from Fife Lake MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 119 of 188 people found this instruction helpful
I first looked up my Model Number on PartSelect.com and looked at the schematic as well as Trouble Shooted my problem.

Reading the posts by others how they Removed, Replaced, and Repaired their Oven Ignitors, I used their helpful info, and of course did mine.

1. Unplugged my Oven/Stove.

2. Removed bottom storage door to ge... read more