Models > VLXR1020T4WB > Parts

VLXR1020T4WB Hotpoint Washer - Parts

All parts for the Hotpoint Washer VLXR1020T4WB

Below is a list of all parts for the Hotpoint Washer VLXR1020T4WB - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the VLXR1020T4WB
1-14 of 120
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Tub Dampening Strap

Appliance would take 4 straps. It is recommended to replace all 4 at the same time. They keep the tub in the center of the cabinet. Sold individually.


Agitator Coupling Kit

Washing machine agitator drive bell with bolt. It connects the transmission drive shaft to the agitator base. *NOTE: Hold down bolt not sold separately.


Tub Seal

The main tub seal is located between the transmission and the outer tub. It's the primary water seal in the outer tub for the transmission-shaft. This seal is difficult to replace ...


Timer Knob Clip


Drain Hose - 4 1/2' Long


Drain Pump and Motor Assembly

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.


V-Style Drive Belt


Drain Hose Clip

This clip holds the drain hose to the back of the washer.


Split Ring

This split ring is two inches in diameter.


Dual Water Inlet Valve

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.


Tub Bearing


Hub Nut


Hub Washer


Water Pressure Switch Hose

All Parts for the VLXR1020T4WB
1-14 of 120