Quick Question!

Have you ever purchased from PartSelect.com before?

Models > VBSR3100G0WW > Parts

VBSR3100G0WW Hotpoint Washer - Parts

All parts for the Hotpoint Washer VBSR3100G0WW

Below is a list of all parts for the Hotpoint Washer VBSR3100G0WW - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the VBSR3100G0WW
1-14 of 116
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Tub Dampening Strap

Appliance would take 4 straps. It is recommended to replace all 4 at the same time. They keep the tub in the center of the cabinet. Sold individually.



This plastic dual action agitator is white in color. It is approximately eighteen inches tall with a base diameter of about 12-1/4 inches.


Drain Hose - 4 1/2' Long


Tub Seal

The main tub seal is located between the transmission and the outer tub. It's the primary water seal in the outer tub for the transmission-shaft. This seal is difficult to replace and should probably be installed by a qualified technician.


Timer Knob Clip


Drain Pump and Motor Assembly

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.


6-Rib Drive Belt

This drive belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear.


Tub Bearing


Drain Hose Clip

This clip holds the drain hose to the back of the washer.


Tub Bearing


Split Ring

This split ring is two inches in diameter.


Knob and Clip

This knob accepts a D-shaped shaft.


Lid Switch with Wire Harness

The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.


Agitator Coupling

Bolt not included. This part connects the transmission drive shaft to the agitator base.

All Parts for the VBSR3100G0WW
1-14 of 116