Models > VBSR2080W0WW > Parts

VBSR2080W0WW Hotpoint Washer - Parts

All parts for the Hotpoint Washer VBSR2080W0WW

Below is a list of all parts for the Hotpoint Washer VBSR2080W0WW - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the VBSR2080W0WW
29-42 of 122
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?


This cover goes on top of the balance ring that is located on top of the basket.


Outer Tub

This part holds the water during the wash cycle and houses the spin basket.


Lid Switch Actuator

This is part of the lid switch actuator mechanism and activates the lid switch, when the lid is closed, to start the wash cycle and when the lid is open, it stops the cycle.


Drain Hose - Pump to Cabinet


Tub Dampening Strap Retainer



This screw is sold individually. Size: 14-10 a trt 7/8 s.


Suspension Rod and Spring


Anti-Siphon Clip

This part helps prevent the backflow of water from the tub to main water line.


Hose Clamp Kit

This hose clamp kit contains two clamps. The smaller of the two is an inch in diameter while the larger of the two is two inches in diameter.


Screws - Package of 12


Drain Hose Tie Strap


Lid Bumper

This bumper is sold individually. The bumper is located under the washer lid.


Flood Gasket

This part is for the hose to outer tub.


Transmission and Brake Assembly

This transmission and brake assembly comes with a new tub seal. This kit aids in the spinning or agitating cycles.

All Parts for the VBSR2080W0WW
29-42 of 122