Models
>
UT13140
UT13140 Homelite Edger - Overview
Sections of the UT13140
[Viewing 21 of 21]
Keep searches simple, eg. "belt" or "pump".
Air Cleaner Element
PartSelect #: PS10039827
Manufacturer #: A100631
This foam air cleaner element helps to keep dirt and debris out of the engine in your lawn equipment. It is sometimes called an air filter element, cartridge, or insert. You can find it near the engin...
$6.08
In Stock
Edger Belt
PartSelect #: PS10039670
Manufacturer #: A100493
This is a genuine OEM replacement part specifically designed for lawn edgers. The belt, made of rubber, has a length of 56 inches and a width of 1/2 inch. Note that your previous belt may appear longe...
$62.69
In Stock
Air Cleaner Housing
PartSelect #: PS10039826
Manufacturer #: A100630
This housing is what directly connects the rest of the air filter housing to the equipment. This genuine OEM part is made of high-quality plastic and is compatible with several different models of edg...
$8.36
In Stock
Air Cleaner Gasket
PartSelect #: PS10039823
Manufacturer #: A100627
This OEM-approved air cleaner gasket creates a seal between the air cleaner housing and the carburetor in your lawn and garden equipment. It makes sure that only clean air enters the engine for combus...
$5.65
In Stock
Clamp, Fuel Line
PartSelect #: PS10039820
Manufacturer #: A100624
This fuel line clamp is sourced from the original manufacturer for use in edgers. It is a metal clamping device with a diameter of approximately 1/3 of an inch, placed around the fuel line to keep it ...
$4.99
In Stock
Sustain Board
PartSelect #: PS10039825
Manufacturer #: A100629
This sustain board is used to keep the filter in the correct position within the air filter housing for a variety of different edgers. Made of plastic and sold as an individual part, this sustain boar...
$6.79
In Stock
Questions And Answers for UT13140
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
edger will not run longer than 1 minute
I replaced the carburetor, air filter, cleaned out the gas tan and replaced the fuel line and filter. As a last resort I replaced the gas cap and gas still will not flow from the gas tank to the carburetor. I have worked on engines of all sizes over the years and this one has me stumped.....by the way I am 71 years old:) If anyone has an
... Read more
idea please le me know.
Read less
Parts Used:
-
Manuel from SELMA, NC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!