Quick Question!

Have you ever purchased from PartSelect.com before?

Models > UMV1152CAQ Maytag

UMV1152CAQ Maytag Microwave - Overview

Get Parts and Repair Help for UMV1152CAQ

If you know the microwave repair part you need, you can browse the list of all parts on the UMV1152CAQ, or you can search by name or part description. You can also find your part by where it is located on the UMV1152CAQ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.65

FILTER-AIR;SMH7175,AL-ME

This is a bottom-mounted air filter manufactured for a microwave. The microwave air filter filters the air flowing in and out of the microwave, and traps grease from the exhaust. A...

Order within the next 35 mins and your part ships today!
$31.86

Micro Switch

This is a micro switch, which is also known as a door switch for your microwave. The main reason for needing to replace this part is if you are not getting heat to your appliance. The door switch is located behind the front panel of your appliance. When the appliance door closes, this part will make contact with the door hook, which will allow the microwave to heat. Use caution when making this installation, as high-voltage capacitors found in microwaves can hold a lethal electric charge for longer periods of time, even if the appliance has been unplugged. It is recommended you wear work gloves for this repair.

Order within the next 35 mins and your part ships today!
$20.15

Microwave Light Bulb - 40W

The light bulb in your microwave allows you to see inside the main compartment, and should come on automatically when you open the door. If your light bulb is not performing this f...

Order within the next 35 mins and your part ships today!
$14.61

Mounting Hardware Installation Kit

Order within the next 35 mins and your part ships today!
$9.02

GLASS-COOK TOP LAMP;-,GL

The microwave light, or surface light lens, keeps the bulb in your microwave protected from getting cracked, scratched, and damaged. If your lens is defective or broken, or the bul...

Order within the next 35 mins and your part ships today!
$7.12

THERMOSTAT;-,NT-101,250V

Order within the next 35 mins and your part ships today!
$26.88

Micro Switch

Order within the next 35 mins and your part ships today!
$18.68

COUPLER

Order within the next 35 mins and your part ships today!
$3.90

ASSY HOLDER-NUT;OTR6

Order within the next 35 mins and your part ships today!
$152.39

Magnetron

This part is used to generate microwave energy/heat.

Order within the next 35 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My glass turntable had broke in my microwave.

  • Customer: Judith from Fowler, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 19 of 24 people found this instruction helpful
Only had to set the new turntable in place. I was very impressed by the quickness in receiving the part. read more

Both bulbs burned out at same time

  • Customer: JOHN C from NORTH BEACH, MD
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 16 of 32 people found this instruction helpful
I r/r the bulb cover, I then removed the burned out bulbs w/ a rag in case they broke they wouldn't have cut my fingers. You turn the bulbs lefty loosy. Installation is just the reverse. Install each bulb and turn righty titey, just snug the bulbs into place. Replace Glass cover and insert one phillips screw in plate and re-tighten read more

The microwave turntable stopped rotating.

  • Customer: Patricia from Santa Cruz, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 8 of 11 people found this instruction helpful
I ordered a new coupler and dropped it into the center hole, jiggled it until it fell into place, put the turntable back on the track, and voila, fixed! It was ridiculously easy. read more