Quick Question!

Have you ever purchased from PartSelect.com before?

Models > UMV1152BAW

UMV1152BAW Maytag Microwave - Overview

Get Parts and Repair Help for UMV1152BAW

If you know the microwave repair part you need, you can browse the list of all parts on the UMV1152BAW, or you can search by name or part description. You can also find your part by where it is located on the UMV1152BAW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for UMV1152BAW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.16

Light Bulb - 40W

Sold Individually.

$9.19

Grease Filter

Sold individually. This metallic vent hood filter collects grease particles in the air from cooking.

$2.80

SCREW

Sold individually.

$47.54

Door Interlock Switch Kit

This kit contains 2 switches - 15 Amp - 125/250 Volt with 3/16" terminals.

$19.11

Air Damper

$16.42

HARD-MOUNT

This hardware kit is used to mount the microwave.

Cabinet Screw

This screw is sold individually.

$5.15

PIN-LOCK

This rod, among other hardware, is used when installing an under the counter microwave. This part also comes in a kit.

Mounting Plate

Hardware, such as screws and brackets, are sold separately.

Toggle Bolt

Common Symptoms of the UMV1152BAW

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

I Had A Hard Time Finding This Filter

  • Customer: Audrey from White Plains, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 524 of 585 people found this instruction helpful
I pulled out the old filters and just put in the new ones with ease, it was that simple. No screws was needed. read more

Microwave worked intermittently depending on how door was closed

  • Customer: Robert from Bainbridge Island, WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 49 of 57 people found this instruction helpful
Remove top grille (2 screws), undo control panel (1 screw). Tilt down control panel, switches are on the left. There are actually three switches that are involved with the door, two horizontally mounted, one vertically mounted. This would be an EASY REPAIR, but it took me a while to figure out which of the three switches was bad, and also took a while to ... read more

Burned out bulbs and grimey filters

  • Customer: DAVID from SAINT PAUL, MN
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 73 of 143 people found this instruction helpful
FIrst I removed the glass bulb cover, old bulbs, and old filters. Then I removed the 6 screws that held the lower cover in place, and bulb sockets. Then washed all parts an reassembled with new bulbs and filters. read more