Models > UMV1152BAS

UMV1152BAS Maytag Microwave - Overview

Get Parts and Repair Help for UMV1152BAS

If you know the microwave repair part you need, you can browse the list of all parts on the UMV1152BAS, or you can search by name or part description. You can also find your part by where it is located on the UMV1152BAS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for UMV1152BAS parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.54

Light Bulb - 40W

Sold Individually.

$6.46

Grease Filter

Sold individually. This metallic vent hood filter collects grease particles in the air from cooking.

$5.71

Light Bulb - 120V 25W

Sold individually.

$12.61

Charcoal Filter

Sold individually.

$33.91

Cooking Tray

This tray rotates in your microwave ensuring more even temperatures.

$45.20

Door Interlock Switch Kit

This kit contains 2 switches - 15 Amp - 125/250 Volt with 3/16" terminals.

$2.70

SCREW

Sold individually.

$56.09

Capacitor

$54.04

Turntable Motor - 60 Hz

This motor rotates the glass turntable in the microwave.

$16.36

High-Voltage Diode Wire

This part allows power to go only one way.

Common Symptoms of the UMV1152BAS [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

I HAD A HARD TIME FINDING THIS FILTER

  • Customer: Audrey from White Plains NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 521 of 582 people found this instruction helpful
I pulled out the old filters and just put in the new ones with ease, it was that simple. No screws was needed. read more

Replaced grease filters on Microwave

  • Customer: Dan from Nutley NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 68 of 130 people found this instruction helpful
It was a piece of cake....slid filters down and out, replace with new filters, slid down filter openings slightly and pulled filter up in to place. Done in less than one minute. read more

Burned out bulbs and grimey filters

  • Customer: DAVID from SAINT PAUL MN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 70 of 139 people found this instruction helpful
FIrst I removed the glass bulb cover, old bulbs, and old filters. Then I removed the 6 screws that held the lower cover in place, and bulb sockets. Then washed all parts an reassembled with new bulbs and filters. read more