Models > UMV1142AAQ

UMV1142AAQ Maytag Microwave - Overview

Get Parts and Repair Help for UMV1142AAQ

If you know the microwave repair part you need, you can browse the list of all parts on the UMV1142AAQ, or you can search by name or part description. You can also find your part by where it is located on the UMV1142AAQ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$5.49

Bulb - 120v 25w

$2.70

SCREW

$3.82

SCREW

$15.76

USE WPL 815174

$3.82

SCREW

$14.11

Carbon Air Filter

$18.56

Grease and Air Filter

$74.23

CAPACITOR

Glass Cooking Tray

SCREW

Common Symptoms of the UMV1142AAQ [Viewing 1 of 11]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No Power to Microwave

  • Customer: John from Palos Hills IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 18 of 37 people found this instruction helpful
After determined the problem on one of the websites...I received the part I needed... removed the control panel and installed the new main fuse In about 15 mins! read more

The microwave would blow the fuse immediately when trying to use.

  • Customer: Roger from Fort Worth TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 2 of 4 people found this instruction helpful
I replaced the large capacitor (.95 uf). Much of the shell (casing) has to be removed and the capacitor is hard to get to. It is housed in a very inconvenient place. Because of the unfamiliarity of how to access the capacitor it took about an hour to get to it. After receiving the new capacitor it only took about half an hour to install it, re-assemble the m... read more

Fuse blows when start cooking.

  • Customer: Phuong from plano TX
  • Difficulty: Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required:
  • 2 of 4 people found this instruction helpful
Replace the capacitor and the fuse. Then it works again. Part arrived in an open plastic bag with scratch. It looked like a returned part, but it works fine. read more