TW3303G (P1128402W) Amana Washer - Instructions

First I removed the remaining piece of the broken timer knob, then screw in the brand new timer knob.

Unscrewed the old one off and then screwed the new one on.

First we turned the power off the machine and it took a total of 10 mins to repair. My husband use the pliers to pull off the stripped worn knob and replace it with the new timing knob and now I am a Happy Girl! Thank you so much, this was the only place I could find the part. We will certainly use you in the future.

Carolyn

Washer is old, but in very good condition. PartSelect was the only company I could find that had a replacement part. That included checking with Amana delears and other repair companies. The sequence of repair in 11 steps: 1. Unplug the washer. 2. Remove 6 philips screws (3 top,3 bottom) from the front of washer control panel to release the control panel. 3.Remove ground wire clipped to the timer. 4.Remove the knob. Could not unscrew,so I placed the tip of screwdriver against the end of the shaft on the backside of the bad timer and tapped to remove the shaft. 5. Use a 1/4" nutdriver to remove 2 screws securing the old timer. 6. Squeeze end tabs and remove control wiring plug. 7. Reverse steps 7 to 4. 8. Unscrew old shaft from the knob 9. Replace timer face plate (keyed to match new timer shaft only goes on one way). 10. Screw knob onto new timer. 11. Reverse steps 2 and 1. Note: It took me twice as long as it should of, I had the assistance of my 2 year old granddaughter Malae.

I removed the screws that held the timer/control cover in place. Removed the two screws that held the timer and unplugged the wires. I discovered that the old knob had jammed the timer shaft, so I probably didn't need a new timer. However, I had one ;-) so I installed it along with the new knob.

this replacement will fit in , but be gentle screwing in knob and do not tighten to let it seat all the way, otherwise it will be difficult to unscrew. tighten until it just snag and no more, plate guide will follow thru, by hand of course.