Models > TUD4700MU2

TUD4700MU2 Whirlpool Dishwasher - Overview

Get Parts and Repair Help for TUD4700MU2

If you know the dishwasher repair part you need, you can browse the list of all parts on the TUD4700MU2, or you can search by name or part description. You can also find your part by where it is located on the TUD4700MU2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for TUD4700MU2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.76

Rack Track Stop

Used for upper dishrack track.

$2.70

Torx Screw

7-18 x 3/4" - sold individually.

$3.76

Rack Assembly Mount with Wheel

Sold Individually. * Part may differ in appearance, but functions same as original. This wheel attaches to the upper rack to glide the rack in and out on the track.

$45.48

Door Gasket - Gray

It provides a waterproof seal between the tub and the door.

$3.51

Lid Spring

This metallic spring is for your dishwasher's soap cup cover.

$3.96

Rubber Washer

Sold individually. Used with the heating element.

$3.76

Soap Cup Latch Kit

This latch kit is for the soap cup door of your dishwasher.

$3.51

Rinse Aid Cap

This cap does not require the use of a o-ring seal.

$3.76

Lid Hinge Pin

$2.70

Hose Clamp

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dishwasher leaking at bottom of door

  • Customer: Eileen from Salt Lake City UT
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 72 of 73 people found this instruction helpful
Installed new door seal. Dishwasher still leaked. Googled the model number and then cleaned the filter at the bottom of the dishwasher, still leaked.
Verified that manifold bearing was not work. It was OK.
Found note that a plugged vent might cause leaking door. Very counterintuitive. Pried off air vent cover. Vent was thouroughly plugged wit... read more

Broken latch on dishwasher prevented operation

  • Customer: Thomas from Dunwoody GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 49 of 85 people found this instruction helpful
Photograph or diagram how the wires connect to the switches before taking out the old assembly. I could have salvaged switches from the old assembly by pulling out the white pins (and avoided buying the new switch kit). There's only one way the pieces go back together, so the wire connections are the only point that required special care and attention. read more

Door Gasket was bad causing a water leak

  • Customer: Edward from Springfield NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 31 of 33 people found this instruction helpful
This repair was very simple. I opened the door of the dishwasher then pulled the old rubber seal (gasket) out; I checked the old gasket to with the new one to ensure the new one was correct then installed the new one. There are two small rubber pieces located in mounting slots below the door gasket that slide out; I slide the old ones out and slide the new o... read more