Quick Question!

Have you ever purchased from PartSelect.com before?

Models > TU8003XLP0 > Parts

TU8003XLP0 Whirlpool Trash Compactor - Parts

All parts for the Whirlpool Trash Compactor TU8003XLP0

Below is a list of all parts for the Whirlpool Trash Compactor TU8003XLP0. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the TU8003XLP0
15-28 of 130
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".



Sold individually.


USE MAC 41001134


Touch-up Paint - Almond



This screw is sold individually. Size: 8-32 x 1/4 inch.


Drive Motor

This drive motor is for trash compactors. The drive motor turns the gears and chain that raise and lower the compactor ram. If your trash compactor will not start or will not stay on during the compaction cycle, you may have a defective drive motor. The start or run switch is used to supply power to the motor to initiate the compaction cycle. If the windings in the motor are open or if the motor centrifugal switch is open, the unit will not start. To check for a defective motor, you will need to remove the unit from the cabinets and disconnect the power.


Toeplate Guard

This part is located at the bottom of your appliance.


Touch-up Paint - Black





Screw, Ground


Container Spring

Used with trash compactors.



Used with trash compactors.


Control Knob



All Parts for the TU8003XLP0
15-28 of 130