Models > TMH14XLB1

TMH14XLB1 Whirlpool Microwave - Overview

Get Parts and Repair Help for TMH14XLB1

If you know the microwave repair part you need, you can browse the list of all parts on the TMH14XLB1, or you can search by name or part description. You can also find your part by where it is located on the TMH14XLB1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for TMH14XLB1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.46

Light Bulb - 40W

Sold Individually.

$6.46

Grease Filter

$2.70

SCREW

$6.58

Bulb - 120v 25w

$22.57

Peel and Stick Door Film

$13.12

Charcoal Filter

$44.27

Door Interlock Switch Kit

This kit contains 2 switches - 15 Amp - 125/250 Volt with 3/16" terminals.

$57.17

Grille Vent

This grille vent mounts on the top of the microwave above the door. This is just the grille vent.

$28.46

Door Latch

This black door latch enables the switches to make sure that the door is closed before it operates.

$2.70

Cabinet Screw

This screw is sold individually.

Common Symptoms of the TMH14XLB1 [Viewing 1 of 37]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

I HAD A HARD TIME FINDING THIS FILTER

  • Customer: Audrey from White Plains NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 520 of 581 people found this instruction helpful
I pulled out the old filters and just put in the new ones with ease, it was that simple. No screws was needed. read more

Replaced grease filters on Microwave

  • Customer: Dan from Nutley NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 68 of 130 people found this instruction helpful
It was a piece of cake....slid filters down and out, replace with new filters, slid down filter openings slightly and pulled filter up in to place. Done in less than one minute. read more

Burned out bulbs and grimey filters

  • Customer: DAVID from SAINT PAUL MN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 69 of 135 people found this instruction helpful
FIrst I removed the glass bulb cover, old bulbs, and old filters. Then I removed the 6 screws that held the lower cover in place, and bulb sockets. Then washed all parts an reassembled with new bulbs and filters. read more