Quick Question!

Have you ever purchased from PartSelect.com before?

Models > TGO336BGD1

TGO336BGD1 Tappan Wall Oven - Overview

Get Parts and Repair Help for TGO336BGD1

If you know the wall oven repair part you need, you can browse the list of all parts on the TGO336BGD1, or you can search by name or part description. You can also find your part by where it is located on the TGO336BGD1 by selecting a section below. We’ve also included any installation videos we have for TGO336BGD1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Light Bulb

This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace wit...


Oven Light Socket

The oven light socket allows you to screw in a light bulb so that you can see the inside of your oven. The light socket is located in the back of your oven, so you will need to remove the back panel to access the socket for the repair. You will also need to remove the current light bulb and the light lens cover so that the old socket can be removed. As you will be working around electrical circuits for this repair, be sure to disconnect the power source from the oven before you begin work on the oven.


Surface Burner Control Knob

Sold Individually. This knob accepts a D-shaped shaft.


Upper Thermostat Knob

This thermostat knob will accept a D-shaped shaft.


Flat Style Oven Igniter

This flat style universal gas oven igniter is 5.53 inches long and comes with a wire harness connector and a bracket. Its amperage range is between 3.2 and 3.6 amps. Use this ignit...



Thermostat Knob

This knob accepts a D-shaped shaft.


Thermostat Bulb Clip


Fluorescent Light Bulb

This fluorescent bulb illuminates the control panel.


Hex Nut

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven light receptacle broken - bulb base broke off

  • Customer: Paul from Spokane Valley, WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 37 of 43 people found this instruction helpful
Turned power off at electrical panel. Pulled oven away from wall. Removed back cover (6 screws), then unplugged wires from old receptacle. I had to pull the squeeze clips backwards & break them to remove the old receptacle - couldn't squeeze them enough to remove them otherwise. The old receptacle came out through the inside of the oven, and the new one snap... read more

The neon tube over the stove top went out

  • Customer: Gunther from Columbia, SC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 14 people found this instruction helpful
Put a new one in. read more

light in range control panel/splash guard went out

  • Customer: JACK from PATCHOGUE, NY
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 1 of 4 people found this instruction helpful
first I removed the 4 screws holding the cover in place. then I removed the 26" flourescent tube by slowing twisting it free. Then I attemped to buy another one at 6 or 8 stores with no luck. While surfing the web for tappan range replacement bulbs, your web site popped up. Thank god. read more