Models > TGFS63DQA

TGFS63DQA Tappan Range - Overview

Get Parts and Repair Help for TGFS63DQA

If you know the range repair part you need, you can browse the list of all parts on the TGFS63DQA, or you can search by name or part description. You can also find your part by where it is located on the TGFS63DQA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for TGFS63DQA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$25.73

Natural Gas to Liquid Propane Conversion Kit

This kit is used to liquid propane.

$24.23

Oven Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.

$88.19

Bake Igniter

$7.64

ANTI TIP KIT

$18.75

Light Bulb Lens

This lens covers the interior oven light bulb.

$13.93

Light Bulb

This 40 watt appliance light bulb are used for some ranges, refrigerators, and microwaves. They are sold individually.

$7.04

Rear Drawer Glide

Sold Individually.

$7.04

Front Drawer Glide

$37.39

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$5.27

Screw

Sold Individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven wouldn't heat - broiler and burners worked fine-Bake Burner Igniter didn't work

  • Customer: Debbie from Rockford MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 85 of 103 people found this instruction helpful
It was the week before Thanksgiving and we didn't know what to do without an oven. I did some research on Google and of all the websites out there, I found a decent price here at Parts Select and ordered it on Friday. I was shocked when FEDEX pulled up to the door on Saturday afternoon. I went online to youtube and found a step by step video specifically ... read more

Stove was set up for natural gas and needed to be converted to LP

  • Customer: Ed from Orange TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 71 of 111 people found this instruction helpful
The LP conversion kit contained very good, detailed instructions. I replaced the gas orifices, took off the bottom door and adjusted the regulator.

Used the screwdriver to adjust the low flame and everything was done. read more

Bought a new gas oven that did not come with a propane conversion kit.

  • Customer: Denny from Bishop CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Wrench set
  • 58 of 86 people found this instruction helpful
I followed the simple instructions that were included in the kit. I started by replacing the 5 orifices on the top burners. The orifices are well labeled with numbers and colors. Next, I tightened the broiler burner orifice and the oven burner orifice with a 1/2 inch wrench. I had to tighten them pretty good to get the flame down where it is supposed to be. ... read more