Models > TGFS63CQB

TGFS63CQB Tappan Range - Overview

Get Parts and Repair Help for TGFS63CQB

If you know the range repair part you need, you can browse the list of all parts on the TGFS63CQB, or you can search by name or part description. You can also find your part by where it is located on the TGFS63CQB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for TGFS63CQB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.71

Front Drawer Glide

Sold individually.

$4.16

Rear Drawer Glide

Sold individually.

$48.36

Flat Style Oven Igniter

This flat style gas oven igniter has an amperage range between 3.2 to 3.6.

$24.04

Natural Gas to Liquid Propane Conversion Kit

$25.55

Temperature Probe

$18.75

Light Bulb Lens

This lens covers the interior oven light bulb.

$46.11

Oven Rack

Sold individually.

$13.93

Light Bulb

This 40 watt appliance light bulb are used for some ranges, refrigerators, and microwaves. They are sold individually.

$26.07

Inner Oven Door Glass Panel

$4.23

Steel Washer

Size: 3/4 inch od x 1/4 inch id

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven quit heating.

  • Customer: John from Darlington SC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 374 of 378 people found this instruction helpful
After reading up on the problem of the gas oven not lighting I decided I needed to install a new igniter. I had read where some people just pulled a panel off the back and installed a new one.. yeah, no such luck with this model so I had to crawl into the broiler drawer space [which I had to clean out first]. Note, if you wear trifocal glasses you might as ... read more

broken slide

  • Customer: Joseph D. from Stuart FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 364 of 367 people found this instruction helpful
Pulled broken one out, slid in the new. Most unbeliveable service I have ever received. Tremndous job, you should sell it to others, Many thanks read more

Oven was difficult to light, then stopped lighting altogether

  • Customer: Ritchie from Ithaca NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 185 of 261 people found this instruction helpful
1. Turned off circuit breaker to stove
2. Removed the two screws holding down the floor of the oven (screws are at back.), and then lifted it out.
3. Removed the nut holding down the flame guard, and lifted it off.
4. Opened the bottom drawer.
5. Removed the protective cover in the back left of the oven at the bottom, first removing the ... read more