Models > TGF605EU1

TGF605EU1 Tappan Range - Overview

Get Parts and Repair Help for TGF605EU1

If you know the range repair part you need, you can browse the list of all parts on the TGF605EU1, or you can search by name or part description. You can also find your part by where it is located on the TGF605EU1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for TGF605EU1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$28.02

Oven Temperature Sensor

Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porc...

$13.93

Light Bulb

This 40 watt appliance light bulb are used for some ranges, refrigerators, and microwaves. They are sold individually.

$30.13

Drip Bowl - 8"

Sold individually.

$35.95

Door Hinge - Left Side

This hinge is located on left side of the oven door.

$34.04

Hinge - Right Side

$5.94

Levelling Leg with Rubber Pad

Sold Individually.

$26.13

Burner Control Knob

Sold Individually. This knob accepts a D-shaped shaft.

$6.21

ROLLER

$3.27

SCREW

$80.68

Spark Module

A device which uses high voltage spark discharge to the spark switch to ignite gas.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven not heating to desired temperature

  • Customer: Dan from Bellevue ID
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 35 of 52 people found this instruction helpful
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with tw... read more

Springs pooped off door hinges, causing hinges to break through door face

  • Customer: Xavier from Rocky Point NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 7 of 10 people found this instruction helpful
Remove decorative side panels on stove to expose backside of hinge and springs;
remove door;
remove old hardware;
since hinge openings were bent, straighten hinge opening in oven face;
attach spring to inside of oven;
slide hinge through opening;
attach spring to hinge;
screw hinges to oven face;
repeat on other side;<... read more

the stem of the stove top burner control knob cracked

  • Customer: Andrew from Brooklyn NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
the new knob fit the stem on the burner control perfectly. However, the lettering on the knob (Lite, low, etc.)is exactly 180 degrees in the wrong orientation. So, when using the knob the user has to ignore the print and look at the other control knobs to know which direction, etc. to twist the knob. read more