Models > TGF364SCWA

TGF364SCWA Tappan Range - Overview

Get Parts and Repair Help for TGF364SCWA

If you know the range repair part you need, you can browse the list of all parts on the TGF364SCWA, or you can search by name or part description. You can also find your part by where it is located on the TGF364SCWA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for TGF364SCWA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$38.75

Flat Style Oven Igniter

This flat style gas oven igniter has an amperage range between 3.2 to 3.6.

$11.93

Surface Burner Igniter Electrode

Use this igniter with sealed burners.

$44.14

Oven Rack

Sold individually.

$0.45

Top Burner Mounting Screw with Washer

This is now a new zinc and black-coated screw that will resist rust and seizing.

$37.39

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$31.32

Broiler Pan

Pan Only. Must order insert separately.

$52.21

Broiler Pan Grate Insert

Broiler pan sold separately.

Small Burner Base with Orifice and Igniter

This part also includes 3 screws. Small burner cap is sold separately.

$21.12

Surface Burner Control Knob

Sold Individually. This knob accepts a D-shaped shaft.

$17.52

End Cap

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven quit heating.

  • Customer: John from Darlington SC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 386 of 393 people found this instruction helpful
After reading up on the problem of the gas oven not lighting I decided I needed to install a new igniter. I had read where some people just pulled a panel off the back and installed a new one.. yeah, no such luck with this model so I had to crawl into the broiler drawer space [which I had to clean out first]. Note, if you wear trifocal glasses you might as ... read more

Oven was difficult to light, then stopped lighting altogether

  • Customer: Ritchie from Ithaca NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 187 of 264 people found this instruction helpful
1. Turned off circuit breaker to stove
2. Removed the two screws holding down the floor of the oven (screws are at back.), and then lifted it out.
3. Removed the nut holding down the flame guard, and lifted it off.
4. Opened the bottom drawer.
5. Removed the protective cover in the back left of the oven at the bottom, first removing the ... read more

Oven Would Not Heat - Oven Ignitor Failure

  • Customer: Peter from Fife Lake MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 108 of 172 people found this instruction helpful
I first looked up my Model Number on PartSelect.com and looked at the schematic as well as Trouble Shooted my problem.

Reading the posts by others how they Removed, Replaced, and Repaired their Oven Ignitors, I used their helpful info, and of course did mine.

1. Unplugged my Oven/Stove.

2. Removed bottom storage door to ge... read more