Models > TGC8X3XCW3

TGC8X3XCW3 Tappan Cooktop - Overview

Get Parts and Repair Help for TGC8X3XCW3

If you know the cooktop repair part you need, you can browse the list of all parts on the TGC8X3XCW3, or you can search by name or part description. You can also find your part by where it is located on the TGC8X3XCW3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the TGC8X3XCW3 [Viewing 3 of 3]

$12.23

Burner Grate

Sold individually.

$39.80

Spark Module - 120V

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$18.64

Bushing

$31.02

Igniter Switch

When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.

$30.25

Drip Pan

$7.25

Hex Nut

$142.56

Gas Pressure Regulator

***No Conversion Kit Required - Adjust On Appliance*** This valve automatically cuts off the flow of a liquid or gas when it reaches a certain pressure.

$5.71

SCREW

KNOB-CONTROL

$30.91

RETAINER

Common Symptoms of the TGC8X3XCW3 [Viewing 1 of 14]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My burners would not light. There wasn't the tell tale "click, click, click" of the spark module.

  • Customer: Jonathan from Arkport NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 11 of 16 people found this instruction helpful
First I had to slide the stove out of its cubby and then I removed the two screws holding on the shield. I next removed the wires going to the spark module. I removed the top screw and loosened the bottom one. Installed the new spark module in reverse order. Less than 15 minutes for whole repair. Still have problems with spark module not working if oven... read more

tHE ORIGINAL MODULE DIED AFTER 21 YEARS OF SERVICE

  • Customer: Jose from El Paso TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 8 of 13 people found this instruction helpful
First had to move the stove out of its "nest", take the side cover off, remove 1 screw and loosen the other , take the old module out and reverse the operation. That simple.
Part was supplied 1 day before promised date, awesome. Part fitted exactly as the OEM part, works like a charm, everyone happy. read more

Grates were old and rusted and scratching the bottom of my pots

  • Customer: Sue Z from Los Angeles CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 5 people found this instruction helpful
I threw the old ones out and replaced them with the new ones. It was a no-brainer :) The parts arrived super fast. Great, no hassle service. read more