Quick Question!

Have you ever purchased from PartSelect.com before?

Models > TGB500CGB2

TGB500CGB2 Tappan Wall Oven - Overview

Get Parts and Repair Help for TGB500CGB2

If you know the wall oven repair part you need, you can browse the list of all parts on the TGB500CGB2, or you can search by name or part description. You can also find your part by where it is located on the TGB500CGB2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for TGB500CGB2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.68

Light Bulb

This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace wit...

Order within the next 11 hrs and your part ships today!
$30.10

Oven Light Socket

The oven light socket allows you to screw in a light bulb so that you can see the inside of your oven. The light socket is located in the back of your oven, so you will need to remove the back panel to access the socket for the repair. You will also need to remove the current light bulb and the light lens cover so that the old socket can be removed. As you will be working around electrical circuits for this repair, be sure to disconnect the power source from the oven before you begin work on the oven.

Order within the next 11 hrs and your part ships today!
$35.45

Rack

Order within the next 11 hrs and your part ships today!
$214.93

Flat Glow Bar Igniter

This flat glow bar igniter is designed for gas ovens. The function of the part is to ignite the gas to light the oven burner. If your gas igniter does not glow, or if it glows but will not light, you may need to replace this part. The flat glow bar igniter is in the back of your gas oven. You will need to remove the access panel on the back of your oven to disconnect the igniter. Be sure that the gas source to the oven is shut off before you begin this repair. This part is sold individually.

Order within the next 11 hrs and your part ships today!
$31.72

Door Hinge Receptacle

Sold individually.

Order within the next 11 hrs and your part ships today!
$80.44

Exterior Drawer Glass - Black

Order within the next 11 hrs and your part ships today!
$39.41

COVER

$4.19

Thermostat Bulb Clip

Order within the next 11 hrs and your part ships today!
$121.96

Outer Oven Door Glass - Black

Order within the next 11 hrs and your part ships today!
$100.12

TRIM

Common Symptoms of the TGB500CGB2

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven light receptacle broken - bulb base broke off

  • Customer: Paul from Spokane Valley, WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 38 of 50 people found this instruction helpful
Turned power off at electrical panel. Pulled oven away from wall. Removed back cover (6 screws), then unplugged wires from old receptacle. I had to pull the squeeze clips backwards & break them to remove the old receptacle - couldn't squeeze them enough to remove them otherwise. The old receptacle came out through the inside of the oven, and the new one snap... read more

Inside glass just exploded when pre heating oven

  • Customer: George from Cleveland, OH
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 3 of 6 people found this instruction helpful
I unscrewed 4 screws and took the door apart. The only trouble was I did not pay attention to the way the spacer was positioned. When I put the door back together I really had to look at the way it fit in the main part of the door. I had to use 2 small pieces of tape to hold the glass in place since the door was still atached to the oven and not laying flat.... read more

Broken oven thermostat

  • Customer: Dan from Riverside, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 4 people found this instruction helpful
I manage a maintenace department for 11 group homes
Thanks for a quick fix!!!!

Dan Underwood read more