Quick Question!

Have you ever purchased from PartSelect.com before?

Models > TFU12M4AW0 > Instructions

TFU12M4AW0 Tappan Freezer - Instructions

All installation instructions for TFU12M4AW0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the freezer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the TFU12M4AW0
16-30 of 55
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken Slelf Ends In Freezer

  • Customer: STEPHEN from CAMP VERDE, AZ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 4 of 5 people found this instruction helpful
Inserted end pieces and remounted old refrigerator bar

end cap broke

  • Customer: GEORGE from WEST LIBERTY, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 4 people found this instruction helpful
slid one end cap into slot and pulled into place. Put other end cap into cross bar and put other end of cross bar on to other end cap proceeded to put other end cap in to other slot in door and pulled into place. Job complete Job took less than three minutes.

I Lost The Key

  • Parts Used:
  • KEY
  • Customer: VICKIE from DAWSON, GA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 3 of 5 people found this instruction helpful
I order another one thanks

door handle replaced

  • Customer: Thomas J. from Madison Heights, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 2 people found this instruction helpful
Old handle was off already. Took the to screws from old handle, put the new one on screwed it on and that did it.

door handle broke after years of use

  • Customer: christine from gloucester, MA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 5 people found this instruction helpful
I ordered the handle , which was easy and resonable priced.
I used a cordless screw driver . And it was done in under 30 seconds . Quick repair

Kids broke the handle somehow on the garage freezer

  • Customer: Geneva from Murrieta, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 4 people found this instruction helpful
By simply popping off the handle cover the two screws were revealed which attach the handle to the door. New handle fit exactly like the old one. Easy peezzy lemon squeezy.

Just lost key

  • Parts Used:
  • KEY
  • Customer: Toni from Little Rock, AR
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
No repair. The key fit!

No instructions included

  • Customer: Beverly from Provo, UT
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
Visual assessment and put in by hand.

shut freezer-vacuum pump made hard to reopen-wife broke handle in tugging.

  • Customer: mike from longview, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 1 of 2 people found this instruction helpful
first removed two screws that held handle. Then replaced. Ordered a motor 3 years ago from land office with verbal over counter instructions and that was easier but to get part this time was very simple ! With the model number and name brand input on site I had part in 3 days instead of waiting for a chance to visit land store and HOPE they had the part. Y'all might consider a zoom feature for us older folks.

Broken handle

  • Customer: Bill from Elmira, NY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 2 people found this instruction helpful
I was surprised that the screws and trim piece were not included so make sure you have them from the old handle or order new. First removed the broken ends still on the freezer. I removed the small metal brackets from the old handle and put them on the new one, screwed the handle to the freezer and put the trim piece on. Real easy.

broken pieces

  • Customer: D from Fairport, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 5 people found this instruction helpful
replaced them

The handle broke off the door

  • Customer: Martha M from Fort Worth, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
We removed the trim and the screws and kept them in a safe place until the handle arrived. It took only about 10 minutes start to finish. Very Easy!

broken shelf end

  • Customer: Roger from Enfield, NH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
snapped in the new shelf end and we were back in business. Thanks for the great & fast service RJL

Broken door shelf end brackets

  • Customer: RUDOLPH from PRINCETON, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 3 people found this instruction helpful
Push-in replacement - easy. I must note that I received my order within two days - remarkable service from Part Select!

Could Not Lock

  • Parts Used:
  • KEY
  • Customer: brenda from snellville, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 4 people found this instruction helpful
Oh yea thanx to partselect it went great didnt get fisrtkey but when got the second key it worked great thanx partselect
All Instructions for the TFU12M4AW0
16-30 of 55