Models > TEF361ESD > Instructions

TEF361ESD Tappan Range - Instructions

All installation instructions for TEF361ESD parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the TEF361ESD
376-390 of 486
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Purchased home where previous owner melted Aluminum Foil to bottom panel of oven.

  • Customer: Michael from Wimauma FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed 2 screws from rear of panel and dropped new panel in. Re-installed screws. Oven like new again. Aluminum foil was burning and emitting foul odor when oven was on.

Front Glass Broken

  • Customer: Alice from Panama City FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
That was so easy! I found a Youtube Video, verified that mine worked exact same way, found out that I also needed the top plastic part, ordered online, arrived super fast, so I carefully put everything back together. Extremely happy to see it fixed again. Thank you!

replace oven element

  • Customer: Cathy from Farmersburg IN
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
good

oven element not working

  • Customer: Patricia from Hendersonville NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed old element and just popped in the new one

Heating element , not heating

  • Customer: Joseph from Littleton NH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
1. Made sure replacement part matched the defective part. 2. Got the recommended tools. 3. Pulled out range away from wall. Unplugged range. 4. Opened oven door and removed two screws ( with nut driver ) that hold heating element and detached the two wires from the element with pliers. Threw away old element and than connected the two wires ( one to each end of the new heating element ) . Than I use the nut driver to secure the new element with the two screws I removed earlier. Plugged range back in and pushed it back against the wall. Than turned on oven and the oven heated very well. Less than 15 minutes to complete the task.

Bake element needed replacement

  • Customer: Paula from Cazenovia NY
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Piece of cake mostly because the video was very helpful clear and thorough

Oven bake element burned out

  • Customer: Charles from Saint Augustine FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Replaced element

The lower oven heat element went out

  • Customer: Jim from Webster WI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
I went on line and looked up our Model no and serial number of our Frigidaire Range, on Part Select's website, found the part and ordered. Within 3 days the part arrived, and to work on the lower heat element, the two oven racks are removed then I used a small socket set to take the connecting screws out, pull the bake element out of the socket, remove the power cords, then reverse the process install the power cords(just easy slip on) and then reattach the screw, tighten, and put the two over racks back in their place. Turn the oven on and the oven worked beautifully.

aluminum foil melted on oven bottom

  • Customer: Allen from wakefield RI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
It cannot be cleaned as it welded itself to oven bottom. Two screws in back of oven bottom and it lifted right out. The new bottom says "do not use aluminum foil" Very easy repair.

front left burner was on HI no matter what the dail setting was

  • Customer: Eric from Mosier OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
pull back panel, 2 screws & one wire at a time.....And don't forget to KILL POWER!!!!super easy works great now and the wife loves it.

my bake element was sparking it was cracked

  • Customer: JAMIE from SAVANNAH GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
used fill up screw driver removed bake element, detaching it from power wires on both ends replaced it with new bake element screwed back in and was done in 5 minutes.

The Bake Element burned out and broke

  • Customer: Deneice from Guilford MO
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
First I unplugged the stove. I used a nut driver to remove the element from the back of the oven. The ends of the element were attached to wires. I pulled the ends of the element out of the wire ends, being careful to hold on to the wires to protect them from breaking. I pushed the wire ends onto the new element, fed the wires back into the back of the oven, put the screws back in and it was done! The repair was very simple. The hard part was cleaning under the stove and the sides of the stove!! :) When I pulled it out to unplug it I found that my children love to sweep things underneath it!! Oh well now I have a working oven AND a clean stove!

element burned out

  • Customer: james from oscoda MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
watched the video online that was provided. made the job very easy. anyone could do it. works great. thanks.

element burnt out

  • Customer: Edward from Inverness FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
two screws and plugged back in works great

Bottom Element burned out

  • Customer: Jon from Clay Center KS
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
First, I UNPLUGGED the range. After removing the screws that hold the element in I pulled it out, disconnected one side, then tried to disconnect the other side only to find it soldered on. With the diagonal pliers I cut wire next to where the terminal was connected to the element. Using the crimping tool I stripped the end to expose about 1/4 inch of clean wire, twisted it tight, put on a new terminal, crimped it in place and pushed it on the element. After that, all I had to do was push the element back in place and secure it with the screws. The last step was to reconnect the power and turn the oven on low heat for about five minutes to burn off any residue on the element. Works great! Thank you
All Instructions for the TEF361ESD
376-390 of 486