Models > TEF361ESD > Instructions

TEF361ESD Tappan Range - Instructions

All installation instructions for TEF361ESD parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the TEF361ESD
361-375 of 463
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Heating Element burned out

  • Customer: Kristie from Nashua NH
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
This was an easy repair. I was going to call my appliance guy when I read how easy it was to replace on this site I decided to try it myself instead. It was that easy. I removed the old element and installed the new one in under 15 minutes. The video showed how easy it was that I had to try it myself and I am glad I did. I saved a bunch.

Baking element split in half

  • Customer: Christine from Ellicott City MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
First, I looked on you tube for a quick video on how to do the job. Next, I removed the old element by simply removing the two screws. Be careful not to let the wires fall back through the holes. Next, just plug in the new element and put the screws back. Simple! Last time the element broke I paid a repairman $185!!!!!! With shipping this time it cost me about $40!

Replacement of bake element

  • Customer: Charles W from Southfield MI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Per your printed instructions - easy to read and follow

No current to the burner

  • Customer: terry from Pensacola FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Checked the burner and no power to heat the burner. removed the old switch and put on the new one.

Burners on high all the time.

  • Customer: Randy from Van TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Replaced control units that were malfunctioning.

Element broke in two

  • Customer: NICOLLE from EADS CO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
My husband fixed it in about 30 minutes or less. He said it was a piece of cake!

baking element burnt out

  • Customer: Deborah from Deatsville AL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
It was so easy. We pulled the stove away from the wall and unplugged it. My husband used a nutdriver to unscrew the two screws holding the element in place. He unplugged the wires from it when he pulled it out. He plugged the wires to the new element, screwed it back in place and voila! I was ready to bake. So very easy.

broken bake element

  • Customer: MICHAEL from POINT PLEASANT WV
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
nothing to it

the stove eye would go to high and stay

  • Customer: ronnie from cana VA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
watched the veido first then un pluged the stove then i took out 6 screws and 2 from the switch and reversed every thing

Lower heat element quit working

  • Customer: Donna from Taylorville IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Undid two screws; removed old element; inserted new element and placed the bracket and two screws to hold in place.

Needed to replace the bottom heating element in my oven

  • Customer: Ilene from Albuquerque NM
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I watched the video--that was very, very helpful. My son helped me, but I think I might have been able to handle it without him after watching the video. Also, your price was far less than half of what another website quoted for the same heating element.

Oven not heating

  • Customer: Steve from lake Hiawatha NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Removed oven from wall, disconnect power source, loosen nuts from element, pull element out, disconnect wires, hook up wires to new element, put back nuts.Plug in and it worked great.

Bake element burnt out

  • Customer: Elizabeth from Houston TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Disconnected power; unscrewed element from oven wall; pulled element off of contacts. Pushed new element onto contacts; screwed to oven wall

Bake element caught fire and stopped working

  • Customer: Megan from Savannah GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
After in I found my oven glowing from the small fire inside, I thought I was in for an expensive repair or complete replacement. Part select helped me find the exact part I needed and the video showed me just how easy it would be. $40 and 15 min later my oven was fixed and I was baking again! The repair consisted of removing two screws and simply removing and plugging in the new bake element. Thanks for the help!!

Purchased home where previous owner melted Aluminum Foil to bottom panel of oven.

  • Customer: Michael from Wimauma FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed 2 screws from rear of panel and dropped new panel in. Re-installed screws. Oven like new again. Aluminum foil was burning and emitting foul odor when oven was on.
All Instructions for the TEF361ESD
361-375 of 463