Models > TEF351EWC > Instructions

TEF351EWC Tappan Range - Instructions

All installation instructions for TEF351EWC parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the TEF351EWC
361-375 of 508
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

burner switches had only two settings off and high

  • Customer: Margarita from Palmyra VA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
After making sure it was the switches themselves not the burners that were the problem, it was easy locating the exact parts I needed on PartSelect and the shipment arrived in a timely manner. I had to replace two out of four switches. Using a screwdriver, I detached the display pannel and removed the faulty switches. Then I disconnected the old wires and attached them to the new switches, one at a time. Closed everything up and the "new" range works great!

One terminal was hard to remove.

  • Customer: Alma from Lonoke AR
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Turned off electric at breaker box for range. Using a socket wrench from my little pink tool kit, I removed the two screws holding the unit at the back of the oven. Gently pulled each side of the unit out, exposing the terminals. Holding with one hand and wiggling the terminal with the other, removed the element. One was very easy, but the other was harder. Next I connected the new element to the terminals. Gently pushed the terminal back into the oven wall and replace the screws. Last turned the electric back on and then turned the oven on. The video that was online was very helpful.

Bottom Element required replacing

  • Customer: thomas from holtsville NY
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Thanks to the video on your web site, the replacement was very easy! We had a hard time removing the screws from inside the oven as we did not have a hexnut driver, but once we removed the screws then we lost one of the wires, (it fell back into the little hole) and then we had to remove the back of the oven to get the lost wire, push it through the little hole and we connected the new element, screwed it back in and then we baked some cookies.

My burner went out in my over

  • Customer: Valerie from Cahokia IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
My husband said it was easy he just unscrewed the two bolts he was through in no time. Thanks so much. I am so glad my over is working, it had been out for 8 month I am so glad my co-worker told me about you all.

Lower element would not heat

  • Customer: Marvin from Stafford VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Replaced the bottom element in the oven. Had to remove the 2 screws holding the element in place. Gently pulled the element loose and disconnected it from the wires connected to the oven. Connected new element to the 2 oven wires. Gently pushed the new element into the holes of the oven. Replaced the screws and I was done

Original Heating Element Cracked

  • Customer: Noel from Hempstead NY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Using a socket set, I unscrewed the original/broken heating coil from the back wall of the oven. I gently removed the screws holding the element in place and slid out the connecting wires from inside the oven wall. Then, I detached the wires from the original heating element and attached them to the new one. I slid the wires back into the oven wall, screwed the new element in place making sure both screws were tight, that's it!

Oven would not heat up.

  • Customer: Timothy from Zephyrhills FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Took 2 screws out pulled element forward, unhooked the two clipped on wires. Reattached wires on to new element pushed back into stove put the 2 screws make in, DONE! Really easy cheap fix thank you for the fast shipping and easy to do with video instuctions available item.

The oven was turning on only the broiler worked. I had already replaced the bottom coil last year so I knew that I had to replace it again.

  • Customer: Dalila from Stroudsburg PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Just pushed the stove to the front unplugged it and unscrewed the old coil and connected the new one. It was very easy to do. I had ordered the same part last year from this company and kept the invoice so I knew exactly what I had to order. I use my oven quite alot so I guess that is why the bottom coil keeps burning out. Thank you for your quick shipping!!! I am one happy customer with a working oven once again.

the coil on the bottom of my oven broke

  • Customer: Tammy from Richmondville NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I order my new part from you, I was very please with your severice,.... Great prices and next day delievery... Thank you so much When I need parts for anything I will be back,,,, Thank you .... Tammy

damaged bottom pan

  • Customer: Neal from Severna Park MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed 2 back screws, lifted pan from rear and pushed front slightly forward/into oven until front lip cleared. Installed new pan in reverse order.

Oven bake element broke in two pieces

  • Customer: William J from Canyon Lake TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
I removed two screws from inside the oven and pulled out the broken element and replaced with new one in just a few minutes,it was so simple!

Heating element burned out

  • Customer: Kenneth from Kerhonkson NY
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed two screws , unplugged old element , plugged in new element , installed the two screws and the oven was back in business . I did cut the power to range/oven before starting .

replace oven element

  • Customer: Michael from Marion LA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
unplug bad element,plugin the new one

I had the pleasure (?) of watching a cherry red glob traverse my oven element, signaling its demise

  • Customer: Kevin from Mt Vernon WA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
It was the holiday season and all through the house, cries of "what's wrong with the oven?" were heard from my spouse. "I know you can fix it!" she said, trying to flatter, so I logged on to Partselect.com to see what was the matter. I found what I needed and ordered with a click, and to my surprise my part arrived quick. I unplugged the oven, thinking "safety first" and bent down to inspect it, expecting the worst. With flashlight, wrench and pliers and still feeling queasy, I was surprised to find out that it was really quite easy. The two screws in the flanges came out with a twist and the terminal slid off, no need for a fist. With the new element in place and the terminals on, the screws were replaced and the repair was all done. “You really DID fix it” she said with a look, “Now get out of my way, I gotta cook!”

LOWER BAKER ELEMENT BURNT IN HALF

  • Customer: LINDA from CLARINGTON OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I WATCHED THE VIDEO THAT WAS FURNISHED ONLINE AND DID WHAT THEY SAID.....I DO ALOT OF DO-IT-YOURSELF PROJECT....BECAUSE OF MY INCOME INPUT...SO THIS PROBABLY SAVED ME A LOT OF REPAIR MAN EXPENSE....LINDA
All Instructions for the TEF351EWC
361-375 of 508