TEF326FSB Tappan Range - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
the lower bake eliment broke on my stove
I first took the time to shop around and found even with the shipping cost it was cheaper online at fridgeadaire. I ordered the part it showed pictures to compare and recieved the correct part in 1 day I couldnt believe how fast it was here. My husband then watched the repair video offered online and did exactly what the video said our stove was working better than ever in 10 minutes thank you so much.
Parts Used:
-
kristy from manville, RI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The bake element failed and stove would not heat.
Removed two hexhead screws and disconnected two electric leads to remove the broken part. Did the reverse to install the new part. The whole job took 10 minutes. It could have not been easier.
Parts Used:
-
Michael from E. Amherst, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bake element burned out
unplugged stove, dissconeccted old element reconnected new element, plugged in stove, baked a pizza
Parts Used:
-
neal from snohomish, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom element brocken
take out 2 bottom element skrews.take off the back lower panel and disconect from Power suply...Simple and easy..Reedsport oregon.up here it is very hard to get parts in town,so I had to order and the bake element was exactly wat I needet.Thank you I am a happy camper now.
Parts Used:
-
alfons from reedsport, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven not heating.
1.Turn off breaker to stove. Remove 1 hex nut from each side of lower heat (bake) element.
2.Gently pull entire element out to expose electric cable (may only come out 2 or 3") and gently but firmly remove each element tab from each wire. NOTE: If open oven door and remove it it is easier to work.
3. Before purchasing the element, I tested to be sure power was full 220v that was feeding the element. If it is not your problem is elsewhere. To do this I attached a voltage tester to ends of electric cable and turned bake control to ON being absolutely sure no contact is being made by the wires to to the stove. This test also offers someassurance that your control panel is functioning.
4.Ordered part online and unbelieveably had it in 2 days.
5. Plugged each end of element stab tab back into wires. BE CAREFUL not to bend the element tab WHEN PUSHING IT BACK ON WIRES. Gentluy push element ends back into rear of stove.
5.Replace both hex nuts.
6.Turn bake element on to test. Should glow almost immediately.
7.Replace door if removed.
8. Write yourself a check for $125.00
2.Gently pull entire element out to expose electric cable (may only come out 2 or 3") and gently but firmly remove each element tab from each wire. NOTE: If open oven door and remove it it is easier to work.
3. Before purchasing the element, I tested to be sure power was full 220v that was feeding the element. If it is not your problem is elsewhere. To do this I attached a voltage tester to ends of electric cable and turned bake control to ON being absolutely sure no contact is being made by the wires to to the stove. This test also offers someassurance that your control panel is functioning.
4.Ordered part online and unbelieveably had it in 2 days.
5. Plugged each end of element stab tab back into wires. BE CAREFUL not to bend the element tab WHEN PUSHING IT BACK ON WIRES. Gentluy push element ends back into rear of stove.
5.Replace both hex nuts.
6.Turn bake element on to test. Should glow almost immediately.
7.Replace door if removed.
8. Write yourself a check for $125.00
Parts Used:
-
John from Morrisonville, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven not working
It was sooooo easy! Took out two screws and replaced baking element replaced the two screws DONE Thanks
Parts Used:
-
jason from hot springs, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element burnt out
Followed instructions provided by online services. Very easy to follow.
Parts Used:
-
Eudulia from Brownsville, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat
-
Dale from Albany, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My oven would broil but would not bake.
-
Lori from Jacksonville, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned out Bake Element
I replaced the bake element. Thankfully, I had the special screwdriver required (tiny square head that I originally throught required an allen wrench). No problem. Great to have part shipped quickly for a quick repair.
Parts Used:
-
Lucinda from Indianapolis, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat
This was the easiest repair ever! I followed the instructions on this website and they were spot on. The part cost about $35...which was a fraction of what the repair man was going to charge to just come out and look at the oven. Super fast shipping and great web site got us baking again in time for our son's birthday!
Parts Used:
-
Lawrence from Winter Park, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My Oven Burner Burnt Out
I turned off the power to my stove. Then I used a 8mm socket to remove the bolts. Put the old one in the box. Connected the element to the oven apparatus and screwed the bolts back in. Turned the power back on and my stove worked like I first took it out the box. Thank you so much
Parts Used:
-
KATRINA L from HEPHZIBAH, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The baking element burnt out. I'm not sure why it isn't that old.
My 16 yr old son did the repair and didn't ask for any help whatsoever. I wasn't even in the room. The new bake element has worked great for these 2 weeks. The price seemed right for the item. The item came when they said it would. I am happy with the service here.
Parts Used:
-
MARIA from RIGBY, ID
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burnt out element
Watch the video! It makes installation really easy. Two minutes to take out old one and install the new. just don't let the wire go back through the hole or you'll have to fish it out. Part arrived quickly. We will order here again!
Parts Used:
-
debra from wayzata, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced a burned out bake element
So easy. Removed two screws, disconnected wires from old element and removed, connected wires to new element, inserted screws and tightened. Done and ready to bake!
Parts Used:
-
Robert from Brookings, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!