Models > TEF326FSA > Instructions

TEF326FSA Tappan Range - Instructions

All Instructions for the TEF326FSA
511 - 525 of 828
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
broken glass in oven door
took screws on outer sides and then removed glass put in new glass replaced screws done
Parts Used:
Inner Oven Door Glass Panel
  • carol from jerseyville, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken drawer slide clips
Easy peasy! Took all of 2 minutes to replace all four clips. Clips snap in by hand and take a little bit of force to make them seat correctly. These are a frequently-replaced item,so that makes me think they are somewhat fragile. Great prices and quick shipping from PartSelect made this so simple. The local appliance parts dealer wanted $11.00 each for the rear clips! Thanks!
Parts Used:
Rear Drawer Glide Front Drawer Glide
  • Richard from Spokane, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Surface element shorted out
Tilted the surface unit and proped it up with the metal arm then I unpluged the old 8"-surface element and replaced it with the new 8"-surface element that I purchased from PartSelect.com. I then lowered the surface unit turned the burner knob on and everything worked fine. Thanks PartSelect.com.
Parts Used:
Surface Element - 8 Inch - 2600W
  • Claude from Baton Rouge, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control will not work - only clock blinks
Took 3 panels off to get to the electric block. Replaced electrical block and put it back together. Still no change.
Parts Used:
Main Terminal Block Kit
  • Sue from Lampasas, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
previous element burned out
First I pulled the oven away from the wall. Then I unplugged the cord from the wall. I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I took the old element out and then put the new element in and connected the two wires.I pushed the elements back into place. I reconnected the power cord to the wall and pushed the oven back in place. It was quick and easy.
Parts Used:
Oven Bake Element
  • Pamela from Post Falls, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Existing stove top burner element worn out
Very easy to repair! I removed the old burner and slid the new burner element in its place. It was as simple as that! No tools required. My one and only complaint would be that the old burner was slightly larger (within 1 inch or so) than the new one so the new one sits slightly crooked on the stove top. But it works just fine. The item also shipped very quickly. Within a day or two. I am very satisfied with the transaction overall.
Parts Used:
Surface Element - 8 Inch - 2600W
  • TRACY from EASTON, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lower drawer drags on floor
remove/pry broken plastic glide from in-side of oven,( wall not drawer ) and install new one.
Parts Used:
Front Drawer Glide
  • columbus from birmingham, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heat Element Broke in Two Spots
PartsSelect.com was a lifesaver! Our part was shipped the same day I ordered it and I received it the very next day!! We weren't out of service long!!
Parts Used:
Oven Bake Element
  • Helen from Holland, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burnt out Bake Element
I removed two screws holding the Bake Element. Pulled out the Bake Element then replaced with the new one. Needless to say that I disconnected power to the unit prior to taking any action.
I was extremely impressed with Part Select easy on-line ordering system and expeditious delivery of the part.
THANK YOU!
Parts Used:
Oven Bake Element
  • Cyrus from Atherton, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had a difficult time removing the second screw from the original bake element
The problem that I encountered with changing the bake element had nothing to do with the part I ordered.
The bake element that originally came with the oven had never been replaced before. I removed the right screw easily, but I had to work a little harder to reomove the left screw. Once I got it out, inserting the new bake element was a breeze. I just watched the video and everything was explained well. If I hadn't run into the problem with the second screw, this could have been done in 15 minutes or less.
The oven works even better than before! The part was shipped out quickly after I ordered it.
We are satisfied so far, with partselect, and will definitely keep them in mind if we are looking for the right part and fast service.
Parts Used:
Oven Bake Element
  • Lynn from Alamogordo, NM
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace inner glass on oven door
Very simple with instructions supplied, Removed two screws inside on back of door, then removed four more screws to get to inner glass,removed broken glass installed new glass, replaced all screws.Job completed. very good instructions,Thank You.
Parts Used:
Inner Oven Door Glass Panel
  • Albert from Bakersfield, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
rusty bowls
very easy
Parts Used:
Chrome Drip Bowl - 6" Drip Bowl - 8"
  • Monty from Kenton, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old element burned out.
(First I ordered the part from PartSelect.com. They were amazingly quick and efficient. The ordering process was a wonderful experience. Great service! No mistakes!!..) When the part arrived, I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. Then connected the new part.
Parts Used:
Oven Bake Element
  • Gregory from Seattle, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Intermittent heating element function
Instructions included with terminal block assembly. Toughest part was to strip the insulator off of the old wires on the stove. I was originally going to just purchase one but after looking at the other terminal blocks and seeing the burnt insulation and some of the wire strands, I just replaced all 4. PartSelect customer sevice was very helpful to confirm the correct part number I needed for my stove.
Parts Used:
Terminal Block Kit
  • Jeffrey from Pittsburgh, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
element in oven went out
was very impressed with the quick delivery. my hubby and i went out of town. my oldest daughter babysat for out dog and cat. i conned her into doing it. she loves to repair things. she said it was very easy to install. unhooked the element from the back of oven, replace with new one.
Parts Used:
Oven Bake Element
  • vicki from wauzeka, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the TEF326FSA
511 - 525 of 828