Models > TEF326FBB > Instructions

TEF326FBB Tappan Range - Instructions

All installation instructions for TEF326FBB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the TEF326FBB
496-510 of 655
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No heat from broiler or baking element

  • Customer: Richard from Richland WA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
I watched the video to make sure I understood what I needed to do. I did just as the video right down to installing the new one before replacing the wires, which was the hardest part the connectors were on tight. Replaced all screws tested to see if oven worked which it did. Thanks for the video.

Only problem was not having the correct tools already on hand

  • Customer: Dawne from Oakland CA
  • Difficulty: Easy
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
My oven went out the day before Christmas. After calling around and getting high quotes from several 24/7 repairmen I decided to do the repair myself. I searched YouTube and found the video from PartSelect on how to repair my oven and decided to order my part. Due to the holidays there was a shipping delay but once I got the replacement part it was easy to repair. Just make sure that you are aware of the tools needed to do your repair. You save a LOT of time that way. My repair probably would have taken me only 30 mins but it took over 2 hrs due to 2 trips to the hardware store.

broken rear door glide

  • Customer: Amy from Ocala FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Emptied the drawer of storage items. Removed the drawer and attached the new rear drawer glide. Replaced the door in the range and refilled the drawer.

one rear and one front glide missing

  • Customer: Rod from Spencer IA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just moved into this house and inherited the oven so I don't know how old it is but I had to put something down in order to submit this review. Popping the glides in place took seconds. I am amazed that I found the parts so easily online and that they arrived so quickly. Usually the simplest of things turns into a time consuming project for me. Thank you!

lower element burnt out

  • Customer: James from Delavan IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
using a screwdriver and nut driver I installed new element after shutting off electricity at fuse box. fit easily. works great. Drawer glides were broken and I installed two of these as well. Easy. Works great too.

oven element burned out

  • Customer: Robin from Roseland LA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
removed the two screws holding the element in place, pulled the wire connectios off of each end, reversed the procedure and whala!! what an easy task, and I was just about ready to spend $556 dollars to buy a new stove, this part cost $23 dollars.

bake element burnt out

  • Customer: David from burleson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
I unscrewed the two 1/4 in. nuts and disconnected both sides. I then reconnected the new element. Works great. Great price and fast shipping.

inside oven glass had cracked.

  • Customer: KAREN from INDIANAPOLIS IN
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
I got the ex husband to come over and take it apart and fix it, he said that it was a really easy repair to complete.

Switch was sparking

  • Customer: Marshall from Newport, NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Took back cover off 2 screws held the switch then moved wires one at a time from old switch to the new one put everything back plugged in stove everything worked

the lower replaced

  • Customer: Madeline from Myrtle Beach SC
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
to install the element was somewhat easy but turn the oven on there is no heat either on the upper or replaced element the light on the range shows it workings so it no doubt has an internal problem that will require a electrician in order to locate the problem due to the noise that i heard when the element went out-i am not surprised that it needs other work

rear drawer glide broken

  • Customer: william from hagerstown MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
rec'd rear drawer glide 2 days after ordering opened package removed from wrappers snapped in place put drawer back in
took nearly 2 minutes to complete 1 1/2 of which was opening packages if you add ten minutes to find and order still under 15 minutes total have used this company before and will use any time something like this is needed. rebuilt my 18 year old dryer motor belts lint filter saved money and got a "new" but old quality maytag same with washer easy to order. quality help if or when needed speedy delivery keep them in business please

Burned out element

  • Customer: David from Mountain rest SC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
The DIY video on the PartSelect website was very useful as it showed how to do the repair without taking the panel off the whole back of the stove. It was a very simple repair being armed with the knowledge shown in the video.

Three terminal blocks burned out (disintegrated) on electric stove

  • Customer: Valentina from Riverside CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
First I want to thank Part Select for having the video online or I would not have attempted the repair. Also I saved over $75 on the parts!!!!!! It would have cost me $105 for parts and $125 for service tech to replace the burned off terminal blocks with new ones. Parts cost me $35 with shippiing, I did the repair saving me $195 !!!!!!!!! I replaced the parts as describied in the video and all is well. By the way, I got the parts in less than 24hours after ordering, cheaper than driving 30 miles to pick up overpriced parts !!!!

burnt element

  • Customer: richard from Smithfield NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
There was a video on here that give the simple instructions. Very easy

Heating element no longer worked.

  • Customer: jimmy from grand prairie TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Disconnect power cord, removed 2ea nut screws from inside the oven connecting heating element. Pull connectors thru the oven wall. Removed 1ea connector from each element connection. Replaced. Reinstall in reverse order.
All Instructions for the TEF326FBB
496-510 of 655