Quick Question!

Have you ever purchased from PartSelect.com before?

Models > TEC8X2XCWA

TEC8X2XCWA Tappan Cooktop - Overview

Get Parts and Repair Help for TEC8X2XCWA

If you know the cooktop repair part you need, you can browse the list of all parts on the TEC8X2XCWA, or you can search by name or part description. You can also find your part by where it is located on the TEC8X2XCWA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the TEC8X2XCWA

[Viewing 4 of 4]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.13

Drip Bowl - 8"

This part is located beneath the element and catches any spills.

$11.36

Surface Element - 8" - 220V

4 Turn.

$5.36

Drip Bowl - 6"

This six inch heavy chrome drip bowl is compatible with electric ranges that utilize plug-in surface burners. This bowl has a narrow 3/8 inch lip.

$17.12

Surface Element - 6"

Sold individually.

$33.56

Surface Burner Terminal Block Kit

This kit includes the terminal block, mounting bracket, contact with wires and wire nuts. It provides a way of connecting individual electrical wires and offers protection of the ...

$1.00

LENS

KNOB-CONTROL

$5.94

RETAINER-LENS

DISCONTINUED

$7.28

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Old pans/bowls were corroded

  • Customer: John from Nisswa, MN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 37 of 39 people found this instruction helpful
Very easy---simply unplug the burners, remove the old pans and replace with the new ones

I was extremely pleased with the easy ordering and prompt delivery of parts that actually fit as they should! read more

Block terminal burnt out, hot plate not working, needed to replace the terminal block

  • Customer: Shaun from Whitehall, MD
  • Difficulty: Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Pliers, Screw drivers
  • 10 of 14 people found this instruction helpful
This should take approx 15-30 mins. It took me 1.5 hours as I pushed the terminals into the wrong end of the block. It's very difficult to get them out when you do that... However, there are no easy instructions on the block or in the instructions to tell you which end to push the terminals into!!! So, with a 50:50 chance of getting it right, I got it w... read more

Burner wouldn't stay hot.

  • Customer: Billy from Lovelady, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 9 people found this instruction helpful
I pulled out the old element and the new one just plugged right in. read more