Models > TEC8X2XCC3

TEC8X2XCC3 Tappan Cooktop - Overview

Get Parts and Repair Help for TEC8X2XCC3

If you know the cooktop repair part you need, you can browse the list of all parts on the TEC8X2XCC3, or you can search by name or part description. You can also find your part by where it is located on the TEC8X2XCC3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the TEC8X2XCC3 [Viewing 4 of 4]

$3.51

Drip Bowl - 8"

$4.54

Drip Bowl - 6"

This six inch heavy chrome drip bowl is compatible with electric ranges that utilize plug-in surface burners. This bowl has a narrow 3/8 inch lip.

$18.96

Surface Element - 8" - 220V

4 Turn.

$18.68

Surface Element - 6"

$27.02

Surface Burner Terminal Block Kit

This kit includes the terminal block, mounting bracket, contact with wires and wire nuts. It provides a way of connecting individual electrical wires and offers protection of the ...

$5.62

SCREW

$3.46

SCREW

$105.64

Surface Burner Switch

$0.74

LENS

$7.25

Hex Nut

Common Symptoms of the TEC8X2XCC3 [Viewing 1 of 307]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Old pans/bowls were corroded

  • Customer: John from Nisswa MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 9 people found this instruction helpful
Very easy---simply unplug the burners, remove the old pans and replace with the new ones

I was extremely pleased with the easy ordering and prompt delivery of parts that actually fit as they should! read more

Old discolored drip pans that would not clean up.

  • Customer: Elizabeth from Smyrna TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 5 of 6 people found this instruction helpful
I simply removed the old drip pans and inserted the new ones which matched and fit perfectly.
I'm glad I found you on line. Your service was fast and the whole transaction was easy!! Thanks. read more

Block terminal burnt out, hot plate not working, needed to replace the terminal block

  • Customer: Shaun from Whitehall MD
  • Difficulty: Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Pliers, Screw drivers
  • 4 of 5 people found this instruction helpful
This should take approx 15-30 mins. It took me 1.5 hours as I pushed the terminals into the wrong end of the block. It's very difficult to get them out when you do that... However, there are no easy instructions on the block or in the instructions to tell you which end to push the terminals into!!! So, with a 50:50 chance of getting it right, I got it w... read more