Models > TDB210RFS3 > Parts

TDB210RFS3 Tappan Dishwasher - Parts

All parts for the Tappan Dishwasher TDB210RFS3

Below is a list of all parts for the Tappan Dishwasher TDB210RFS3. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the TDB210RFS3
1-14 of 86
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Tub Gasket - Gray

The gasket provides a waterproof seal between the tub and the door.


Bottom Gasket

This gasket goes on the bottom of the dishwasher door. Note: Once the gasket is replaced and you continue to have water around the bottom corners of the door panel, you may need to order the splash shield kit.


Water Inlet Valve - 120V 60Hz

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the d...


Lower Spray Arm - Gray

This part comes with the heat shield and the tower. It is located on the lower half of your dishwasher. Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying water and detergent onto the dishes on the dish rack.


Heating Element Brass Nut

This nut is sold individually. It is used to install the heating element.



The drain hose connects to the pump located below the lower spray arm. It aids in proper dishwasher drainage. Size: 7.5 feet long


Dishrack Roller

Sold individually.


Detergent and Rinse Dispenser with Cap

The manufacturer has redesigned this part and it may appear different than the original, but will have the same functionality. This part releases the detergent and rinse aid into the dishwasher.


Door Spring

Sold Individually.


Drain Pump

The pump ejects the water from the dishwasher.


Rinse Aid Cap


Door Strike

This door strike is mounted to the top of the dishwasher cabinet. This part catches the door handle to keep it closed.


Heating Element

This part is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher and is located on the bottom of the dishwas...


High Limit Thermostat

This resettable hi-limit thermostat acts as a safety mechanism that keeps the dishwasher from overheating. This part will cut out if the internal temperature reaches 200 degrees Fahrenheit. It will reset when the temperature drops to 100 degrees Fahrenheit - the differential of 100 degrees.

All Parts for the TDB210RFS3
1-14 of 86