Models > TDB210RFB7A > Instructions

TDB210RFB7A Tappan Dishwasher - Instructions

All installation instructions for TDB210RFB7A parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the TDB210RFB7A
286-300 of 330
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Leak at bottom of door

  • Customer: Dunstan from Port St.. Lucie FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Remove old gasket from tub, soak new gasket in hot water for a few minutes then install starting from center top of tub, when done installing close door for 24 hours, then try to see if leak fixed.

Part was damaged

  • Customer: Adrian from Ridgefield CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed old part and replaced it with new part.

Broken heating element brass nut

  • Customer: William E from High Point NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Ditto the other comments. Easy, great savings. Perfect. Thank you!

When Dishwasher ran water found on floor

  • Customer: Patricia from Gassville AR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I removed the old bottom gasket with my hand & replaced the new one the same way. It was very easy.

Drain Pump failed to drain.

  • Customer: Mark from Belfair WA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I Removed the pump and took it apart. Noticed the impeller was dislodged from the shaft. Only way to fix this was to purchase a new pump. After receiving the new one and verifying its the correct pump, I installed it and ran the washer through a complete cycle. Test complete and I am back in business. Thank you for having the schematics of the dishwasher available, an easy process for purchasing the part and a wide variety correct parts.

BROKEN WHEELS ON LOWER DISH RACK

  • Customer: Barbara from Highland Park IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
JUST A LITTLR SNAP IN THE RIGHT PLACE AND PERFECTION!

soap door did not open

  • Customer: Robert from Broomfield CO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
remove the 2 bottom screws on the door, remover front panel to gain access to soap dispenser. remover 6 screws holding soap dispenser. carefully note the color orientation of the 2 wires. reverse the procedure and you are done

No water coming into dishwasher

  • Customer: Eldon B. from Gouverneur NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Be sure to turn off water going to dishwasher first . take lower front panel off it is below the door. the water valve is located on either the right or left side this one was on the left take the water line off the valve first then take out the two screws that hold the valve two the main frame once that is done remove the inlet tube from the the valve and unplug the wire connector to the valve it just pulls off. now you are ready to reverse the process with the new valve.

did not fill with water

  • Customer: Raymond from Sanbornville NH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I unscrewed the kick plate took out the old part replaced it with the new one .

water intake tube had been chewed by mice

  • Customer: Ronda from Monkey Island OK
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
very simply removed 2 clamps, replace hose, re-installed clamps

Water Leak in Dishwasher Drain Line

  • Customer: Robert from Kirkwood MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I woke up on Christmas Day to water pooling under the kitchen sink (I guess I made the naughty list last year). Upon inspection, I could see that the water connections for the faucet were damp. Since I had all the parts, I replaced the faucet and service lines. Once complete, there were no leaks so I turned on the dishwasher to double check for leaks in those lines. It was all dry when the dishwasher finished but the next morning, more water under the sink.
I proceeded to replace the water line to the dishwasher and ran it through another wash cycle. Still leaking.
I found PartsSelect online and order a new drain line for the dishwasher. To my amazement, FedEx dropped off my order the next morning........yes, the next morning.
It took five minutes to remove the old drain line and install the new one (just a worm clamp at each end). It would have been faster than that but I don't get up and down as fast as I use to.

Detergent door latch worn out wouldn't stay closed.

  • Customer: Gerald from Polson MT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
removed 2 screws holding door skin on. removed 6 screws holding dispenser unit in door. Removed 2 color coded wires. Removed old dispenser, cleaned area for new dispenser. installed 6 screws on new dispenser and connected 2 color coded wires. Re-installed door skin and secured with the 2 screws. Job took all of 10 minutes . Part fit correctly no leaking and is working great.

dishwasher door was falling heavily down when pulled open because one of the two springs was broken

  • Customer: Mark from Apopka FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
identified the correct part to order. when it came, I used a Phillips-head screwdriver to undo the two brackets that hold the unit into the bottom of the countertop so I could slide it out a few inches. once I determined which spring was broken, I pulled out the remaining part and replaced it with the new one -- hooking it first into the hold farthest back in the appliance and looping the longer end over the top of the swiveling catch device that holds the front of the spring. then pushed unit back under countertop and screwed two brackets back into place with the existing wood screws and screwdriver. piece o' cake!

water leaking out the bottom of door.

  • Customer: Nancy from Turnersville NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed the old gasket and slid in the new one. Very easy.

Inlet valve wasn't letting water in

  • Customer: Daniel from Lacona NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
Turned off water and power! Couldn't move dishwasher out, so access was a little problem. Worked to disconnect inlet hose. Finally unscrewed the whole unit, disconnected the outlet hose and the power connection and then unscrewed the unit from the inlet hose. Removed the ell from old unit, applied Teflon tape, and screwed it into new unit. (Tighten it really well. I didn't and had to take things apart again!) Installed new unit starting with the inlet tube, then the outlet tube then the frame screws. Turned water and power back on and tested the dishwasher. SUCCESS! My wife thinks I'm a hero.
All Instructions for the TDB210RFB7A
286-300 of 330