Models > TD-V10031E

TD-V10031E (ABWEGSP) LG Dryer - Overview

Get Parts and Repair Help for TD-V10031E

If you know the dryer repair part you need, you can browse the list of all parts on the TD-V10031E, or you can search by name or part description. You can also find your part by where it is located on the TD-V10031E by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$26.31

Lint Filter

This part has the felt strip and is used to collect lint as it passes through the dryer vent.

$22.19

ROLLER ASSEMBLY

$10.52

Thermistor,NTC

$10.52

Thermal Fuse

$3.05

Sensor

$4.59

Thermostat

$22.86

Poly-V Drive Belt

$17.02

Cover,Guide

$1.95

Leg

$8.18

Guide,Filter

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

dryer wouldn't heat

  • Customer: Bryan from Spokane WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed the heating element, tested it, purchased a new element and installed. read more

dryer had lent fire and didn't have heat in the dry cycLe.

  • Customer: Lorinda from DeWitt MI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
After replacing the wires and the heat thermostat I realze that I needed to replace the thermostat ntc and the thermostat to blower located under door was burnt during fire. I removed front panel,front facing and tumbler to reach thermostat inter wall. It was easy after fixing to other area prior. I thought it was very easy and didn't cosume much time. I'm a... read more

no heat

  • Customer: sean from Mableton GA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I accessed the thermostats by removing the exhaust pipe and a plate where the exhaust can be ported on the side as an alternative. You need to get two hands inside to work. I struggled a bit before I noticed the removable access plate on theside. Took about 40 mins to get all three thermostats replaced. not too bad, but it is a tight working space. read more