Models > TC607X0 > Instructions

TC607X0 Jenn-Air Trash Compactor - Instructions

All installation instructions for TC607X0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the trash compactor repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the TC607X0
16-30 of 121
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Compacting actuator broken due to design flaw

  • Customer: Gerald from Fox Island, WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Socket set, Wrench set
  • 5 of 6 people found this instruction helpful
I received my Actuator Switch Kit 3 days after ordering. I opened the package and found more parts than I anticipated. I read the instructions and had to spend some time to understand them. I followed the instructions (a bit unusual for me) and the installation went without a hitch. The most difficult part was to basically uninstall the compactor from its cabinet location and remove the faceplate for access to the switch that needed to be replaced. Apparently the manufacturer understood there was a design flaw because the instructions said "...for trash compactor integrated switching redesign". Anyway putting it back together and back in the cabinet was very easy.

Off-on switch actuator broken (second time same model)

  • Customer: James from Vancouver, WA
  • Difficulty: Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 5 of 6 people found this instruction helpful
Ordered two replacements. Was shipped two redesigned parts (assemblies). Installation required more-or-less complete disassembly of garbage compactor. Unit is under-counter and is heavy and work is all at the bottom of unit. Requires drilling two new holes in metal. Instructions give wrong size drill for screws supplied. Supplied screws are robust stainless sheetmetal screws with tiny number one recessed Phillips heads - nearly impossible to drive through two layers of sheet metal with a little screwdriver. Most non-mechanics would have given up and called a repairman.

Light switch broke on refridgerator door.

  • Customer: Darlene from Holland, MI
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 7 of 13 people found this instruction helpful
I measured the part then looked for a similar switch that might work. I was so happy to find the exact part we needed for our 24 year old refridgerator!! I was so impressed with your slection of parts and best of all I had the part in 2 days! You are in my "favorites" just in case I need you again!

Thank you

plastic gear broke this is the 2nd time in less than 1 year so this is the 2nd repair

  • Customer: Mary from Lilburn, GA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers, Wrench set
  • 5 of 8 people found this instruction helpful
Unplugged trash compactor and removed from undercounter. Took cover off and removed broken plastic gear. Replaced with new gear and put cover back on

Unit would not operate-off switch broke

  • Customer: Nancy from Rochester, NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 4 of 5 people found this instruction helpful
Husband de-installed the unit and we laid it down on a blanket on the floor. By looking at the diagrams on line we figured out which part we needed. ORDER THIS PART because it is a part that was re-designed to solve the biggest problem with this unit...the foot bar that activates the plunger. In the old design, you had to push up the foot bar at bottom to crush and unlock. Once this redesigned part is installed which requires drilling through the sheet metal (don't worry, they give you a template but hubby did not have the right drill bit), there is a small switch on right of unit under foot pedal which you PUSH with foot NOT PULL UP! Makes the unit much better. Should have been designed like this from the beginning.

Small flat spring flange broke

  • Customer: John from Sugar Grove, IL
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 4 of 5 people found this instruction helpful
Had to buy the entire switch kit when I only needed a small part. I was told the small part was no longer available

The light would not turn on when the refrigerator door was opened

  • Customer: Edward from San Antonio, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 5 of 9 people found this instruction helpful
I removed the plastic portion to get to the switch and wires. I removed the old switch by disconnecting the two wires and pushing it out of its setting.

I discovered the old switch only had 2 prongs where the new switch had 3. Once I figured which 2 of the 3 prongs would light the lightbulb,
I then connected the two wires to the correct prongs of the new switch. I pushed the new switch into its setting and replaced the plastic portion on the refrigerator. Voila, success. The refrigerator door now comes on when its door is opened.

Thanks for the having the part and getting it at our door step in 3 days.

Foot actuator broken off at the bend.

  • Customer: Michael from Fresno, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 4 of 7 people found this instruction helpful
Reattach new actuator using 2 phillips. Very elementary. The difficulty was finding the actual replacement part. Partselect.com made it simple, and my wife now thinks I am a mechanical genius.

broken switch

  • Customer: William from Wilmington, NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 2 of 2 people found this instruction helpful
I broke the directional switch trying to replace the power nuts..duh huh... ordered a new switch, took off the front panel ( 4 screws) replaced the switch (2 bolts) be careful not to lose the small threaded plate used instead of nuts to secure the switch.. and now it works like new again....partselect is a great resource for the diyer

broken gear

  • Customer: Francine from bowie, MD
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Wrench set
  • 3 of 5 people found this instruction helpful
Unscrew the bottom, pull out the chain, replace the gear.

Would not compact

  • Customer: Linda from Rumson, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 4 of 8 people found this instruction helpful
It was very easy. I unscrewed the broken acuator and screwed the new one on. It took less than 5 minutes. Much better than paying a repairman $150 for a service call. This part actually breaks often so I ordered 3 or the future.

Directional switch on a Jenn Aire trash compactor

  • Customer: Danny from Spring Branch, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 3 of 5 people found this instruction helpful
Removed two screws on the front panel cover and lifted off the cover , removed two small screws on the switch bracket, you need a short nut driver, removed the spade clipped wires from the old switch and replaced them on the new part and thats all there was to it.

Compactor piston stuck in down position and couldn't open!!!

  • Customer: George from Houston, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set
  • 2 of 3 people found this instruction helpful
First thing I did was put the unit on its side and removed the bottom to access the broken plastic gear that moves the chain that drives the compactor up and down...There I was able to manually move the chain by turning the nut with pliers and moving the piston up (painfully slow) until I could at least use the bin for trash while I waited for the replacement part to arrive. Once I had the part I loosened the four bolts that allowed the drive gear to move a little and slacken the chain - I then put in the new gear - make sure you have the proper spacing and washers - my replacement kit didn't have any washers so I resused the old washers and all seems to be working well!

Trash carier wore out

  • Customer: Carmen M from Port Orchard, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
Upon the receipt of my part it just had to be slipped into place. I had the part I needed within 3 days of ordering.
My had ordered parts for various items in the past and we have always been very satisfied with the care and experteis of this company.

trashcompacter was getting jamed,making noise

  • Customer: david from tampa, FL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Wrench set
  • 2 of 3 people found this instruction helpful
First i removed 2 screws that holds it to the cabinet,pulled the unit out removed the cover off the bottom of the unit,then i notice the gears were damaged,but was not supprised,because the machine gets over worked.Then i removed one clip,removed one gear,the other gear had a pin,tapped the pin out with a punch ,pulled that gear off.then replaced both gears .Got it back together and it now works like new.i am very pleased with your service,you responded right away and let me know the order had filled.i ordered it on sunday night and i recieved it on tuesday morning .i will surly use your service in the future you guys are great. thanks alot
All Instructions for the TC607X0
16-30 of 121