Models > TC607S0 > Instructions

TC607S0 Jenn-Air Trash Compactor - Instructions

All installation instructions for TC607S0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the trash compactor repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the TC607S0
46-60 of 117
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

took off old piece, screwed on new one. works fine.

  • Customer: Stephanie from Poway CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 3 people found this instruction helpful
straight blade screwdriver. easy as pie.

many thanks

Broken Drive Gear

  • Customer: Michael from Painted Post NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 1 of 4 people found this instruction helpful
Removed the gear cover at the bottom of the compactor. Loosened the slack on the chain. Replaced the gear drive. Replaced the gear cover. Worked like new. No major obstacles.

Part was missing

  • Customer: E Arlene from Reno NV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
plugged it in

Ram quit moving

  • Customer: Hal from Granada Hills CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 0 of 1 people found this instruction helpful
Removed bottom and replaced gears

Compactor wouldn't function. We found a small piece of metal on the floor that turned out to be a part of the switch actuator

  • Customer: William from Clayton CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 4 people found this instruction helpful
repair was simple. just removed the two screws that were holding the rest of the switch actuator in place and installed the new one in it's place.

Compactor ram was stuck in the down position and door would not open

  • Customer: Michael from South Boston MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 1 people found this instruction helpful
After inspecting to make sure the actuator was functional and that power to the unit was not an issue I was able to find that one the drive gears cracked in half and made the compactor inoperable. It was easy to remove the bottom casing with a nut driver. This casing covered the drive gear which operated the ram. After slightly loosening the gear mounts and I was able to replace center gear and re-attach gear chain and re-tighten. Then replace bottom casing and the compactor was back in action. Huge savings!

Switch activator broke

  • Customer: John R. from Cocoa FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 2 people found this instruction helpful
Replaced the broken part with a new part by attaching with 2 small sheet metal screws.

Broken Part

  • Customer: Francisco from Hernando Beach FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 5 people found this instruction helpful
Part replacement

Trash compactor does not actuate

  • Customer: MILIND from BEAVERTON OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 5 people found this instruction helpful
Very simple. 2 screws to unscrew - and then screwed the new actuator in. took less than 10 minutes.

unit was missing parts

  • Customer: Richard from glendale AZ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 2 people found this instruction helpful
Installed new parts. Worked fine.

Bought a washer without front leveling feet

  • Customer: Rick from Lennon MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Wrench(Adjustable)
  • 0 of 2 people found this instruction helpful
The repair was simple as you can imagine. Thought I could buy these legs at any big box store or at least at the local hardware store. No such luck. Partselect had the right product---easy to order and easy to install. Things around here are great.

Smelly kitchen

  • Customer: Saralyn from Dahlonega GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 2 people found this instruction helpful
Removed the old filter and screen and replaced with the new!

switch broke off and would not activate compactor

  • Customer: Jane from Edmond OK
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 2 people found this instruction helpful
removed two screws and replaced broken piece. Only thing a little difficult was getting screws in tightly enough to hold piece secure.

Pressue bar on switch activator snapped off

  • Customer: Geoffrey from East Otis MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 2 people found this instruction helpful
Losses two screws, old part off; install two new screws, new part on. Piece of cake

SWITCH ACTIVATOR BROKE

  • Customer: SCOTT from NORTHGLENN CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 2 people found this instruction helpful
UNSCREWED 2 PHILLUPS SCREWS, PUT NEW ACTUATOR ON WITH 2 PHILLUPS SCREWS. WORKS FINE
All Instructions for the TC607S0
46-60 of 117