Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
Below is a list of all parts for the Westinghouse Washer / Dryer Combo SWXG831HS4. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
Appliance requires 2 .Sold individually.
This belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear.
This part attaches onto the inside of the rear panel of the cabinet.
This thermal fuse limiter, with a limit of 220 degrees Fahrenheit, is manufactured for both gas and electric clothes dryers. Once the internal temperature of the dryer reaches 220 degrees, the heating element cuts out.
This filter collects lint as it passes through the dryer vent.
This belt helps rotate from the drive motor to the drum.
This part helps keep the door closed while the machine is running.
The pump is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.
This ignition coil kit contains two coils. One is a two wire secondary coil, while the other is a three wire booster coil. Both should be used together in your gas clothes dryer.
This washing machine water inlet valve has two ports for water to enter.
"Male" piece of a dryer door closing mechanism.
This knob accepts a D-shaped shaft.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.