Models > SWSG1031DQ1 > Parts

SWSG1031DQ1 Westinghouse Washer Dryer Combo - Parts

All parts for the Westinghouse Washer Dryer Combo SWSG1031DQ1

Below is a list of all parts for the Westinghouse Washer Dryer Combo SWSG1031DQ1 - White. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the SWSG1031DQ1
1-14 of 196
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Drum Glide - White

Appliance requires 2 .Sold individually.


Drum Support Bearing

This part attaches onto the inside of the rear panel of the cabinet.


Drive V-Belt

This belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear.


Lint Filter

This filter collects lint as it passes through the dryer vent.


Door Catch

This part helps keep the door closed while the machine is running.


Multi-Rib Drum Belt

This belt helps rotate from the drive motor to the drum.


Lower Front Felt Seal with Adhesive


'M' Series Ignition Coil Kit

This ignition coil kit contains two coils. One is a two wire secondary coil, while the other is a three wire booster coil. Both should be used together in your gas clothes dryer.


Drain Pump - 120V 60 Hz

The pump is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.


Water Inlet Valve

This washing machine water inlet valve has two ports for water to enter.


Front Upper Felt Seal with Adhesive


Door Strike

"Male" piece of a dryer door closing mechanism.


Bearing Bracket

This part mounts on the inside of the rear cabinet.


Leveling Leg

Sold individually. This part is used to adjust the height and keep the appliance level.

All Parts for the SWSG1031DQ1
1-14 of 196