Quick Question!

Have you ever purchased from PartSelect.com before?

Models > SWS1649HS0 > Parts

SWS1649HS0 Westinghouse Washer - Parts

All parts for the Westinghouse Washer SWS1649HS0

Below is a list of all parts for the Westinghouse Washer SWS1649HS0. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the SWS1649HS0
15-28 of 109
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$30.10

Splash Cover Seal

$28.79

Tension Spring

This tension spring works in conjunction with the idler pulley. The spring is part of your top load washing machine assembly. The most likely reasons for needing to replace the tension spring is if you notice that your washer is not spinning or agitating, the drive belt has come loose, and the idler pulley is no longer secure. To access this part, you will need to remove the front of your washer. The spring is located underneath the bottom of the tub. This is a genuine OEM part that comes right from the manufacturer.

$8.91

SPRING

$8.26

SPRING

$28.52

Horizontal Spring

$8.34

Upper Spin Bearing Washer

The upper spin bearing for a washer can solve many issues such as loud and odd noises, or leaking water. Replacing the spin bearing could solve these issues. The tools needed for this replacement are screwdrivers, a socket set, and a putty knife. To repair, first lift the top of the washer and remove the screws at the bottom of the front panel to pull away. Next, pull off the dispenser cover, cup, and agitator. Detach switch tube from the tub cover and remove tub cover, then use the 1/2 inch socket to remove the trunnion bolts and pull out inner tub. For the rest of the installation instructions, refer to the diagram provided by the manufacturer. Remember to unplug the appliance from the power source as a safety precaution.

$1.38

INSERT

$48.24

Spin Bearing

The spin bearing, used for your washer, is located at the bottom of the outer tub near the transmission. The spin bearing carries the transmission shaft in the drive system, therefore ensuring the shaft is spun properly during its spin cycle. If your spin cycle makes loud or odd noises, replacing the bearing could be a solution to your problem. Refer to the diagram provided by the manufacturer for further installation instructions. As a safety precaution make sure to unplug appliance from the power source.

$9.26

CLAMP

Clamp used for hoses.

$7.93

Idler Pulley C-Clip

$6.65

Screw - Sold Individually

$35.67

Pump to Tub Hose - Black

$7.71

INSERT

$39.13

Water Inlet Hose Assembly

All Parts for the SWS1649HS0
15-28 of 109