Quick Question!

Have you ever purchased from PartSelect.com before?

Models > SWS1549AS0 > Parts

SWS1549AS0 Westinghouse Washer - Parts

All parts for the Westinghouse Washer SWS1549AS0

Below is a list of all parts for the Westinghouse Washer SWS1549AS0. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the SWS1549AS0
15-28 of 108
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$29.13

Tension Spring

This tension spring works in conjunction with the idler pulley. The spring is part of your top load washing machine assembly. The most likely reasons for needing to replace the ten...

$8.47

Upper Spin Bearing Washer

The upper spin bearing for a washer can solve many issues such as loud and odd noises, or leaking water. Replacing the spin bearing could solve these issues. The tools needed for this replacement are screwdrivers, a socket set, and a putty knife. To repair, first lift the top of the washer and remove the screws at the bottom of the front panel to pull away. Next, pull off the dispenser cover, cup, and agitator. Detach switch tube from the tub cover and remove tub cover, then use the 1/2 inch socket to remove the trunnion bolts and pull out inner tub. For the rest of the installation instructions, refer to the diagram provided by the manufacturer. Remember to unplug the appliance from the power source as a safety precaution.

$30.10

Splash Cover Seal

$48.78

Spin Bearing

The spin bearing, used for your washer, is located at the bottom of the outer tub near the transmission. The spin bearing carries the transmission shaft in the drive system, therefore ensuring the shaft is spun properly during its spin cycle. If your spin cycle makes loud or odd noises, replacing the bearing could be a solution to your problem. Refer to the diagram provided by the manufacturer for further installation instructions. As a safety precaution make sure to unplug appliance from the power source.

$29.13

Horizontal Spring

$8.91

SPRING

$7.93

Idler Pulley C-Clip

$4.00

Washer Capacitor

The capacitor is used on the washer motor to help the motor get up to speed quickly before transferring power to the run capacitor.

$6.84

Screw - Sold Individually

$7.71

INSERT

$7.00

Fill Hose Washer

1 per package.

$39.41

Water Inlet Hose Assembly

$26.46

Lid Strike - White

This part is used to activate the lid switch when the lid opens/closes.

$16.20

Levelling Leg Pad

Sold Individually.

All Parts for the SWS1549AS0
15-28 of 108