Quick Question!

Have you ever purchased from PartSelect.com before?

Models > SWS1339HS1 > Parts

SWS1339HS1 Westinghouse Washer - Parts

All parts for the Westinghouse Washer SWS1339HS1

Below is a list of all parts for the Westinghouse Washer SWS1339HS1. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the SWS1339HS1
15-28 of 104
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$48.78

Spin Bearing

The spin bearing, used for your washer, is located at the bottom of the outer tub near the transmission. The spin bearing carries the transmission shaft in the drive system, theref...

$8.47

Upper Spin Bearing Washer

The upper spin bearing for a washer can solve many issues such as loud and odd noises, or leaking water. Replacing the spin bearing could solve these issues. The tools needed for this replacement are screwdrivers, a socket set, and a putty knife. To repair, first lift the top of the washer and remove the screws at the bottom of the front panel to pull away. Next, pull off the dispenser cover, cup, and agitator. Detach switch tube from the tub cover and remove tub cover, then use the 1/2 inch socket to remove the trunnion bolts and pull out inner tub. For the rest of the installation instructions, refer to the diagram provided by the manufacturer. Remember to unplug the appliance from the power source as a safety precaution.

$9.26

CLAMP

Clamp used for hoses.

$135.65

2-Speed Motor with Pulley

$29.13

Horizontal Spring

This is a horizontal spring, but you may know it as a suspension spring, and it is a part for your washing machine. Its function is to stabilize the outer tub by keeping it balance...

$8.28

SPRING

$5.98

Agitator Screw

This is the bolt (screw) that holds the agitator in place.

$30.10

Splash Cover Seal

The tub ring seal or splash cover seal is used for washers. This part seals the tub cover to the outer one and prevents water leakage from around the tub ring. If your seal is damaged and you are experiencing water leakage, it is best to replace this part. Refer to the manual provided by the manufacturer for further installation instructions. Remember to unplug your washer from the power source before starting this installation process.

$29.47

Tension Spring

This tension spring works in conjunction with the idler pulley. The spring is part of your top load washing machine assembly. The most likely reasons for needing to replace the ten...

$7.44

Agitator Spacer

Use in conjunction with the agitator screw.

$39.69

Water Inlet Hose Assembly

This water inlet hose is used in washers. The hose connects the washer water inlet valve to the water supply in your home. There are two solenoids on the valve, which are referred ...

$8.91

SPRING

$6.94

Screw - Sold Individually

$36.37

Pump to Tub Hose - Black

All Parts for the SWS1339HS1
15-28 of 104