Quick Question!

Have you ever purchased from PartSelect.com before?

Models > SWS1233HS0 > Parts

SWS1233HS0 Westinghouse Washer - Parts

All parts for the Westinghouse Washer SWS1233HS0

Below is a list of all parts for the Westinghouse Washer SWS1233HS0. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the SWS1233HS0
15-28 of 106
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.47

Upper Spin Bearing Washer

The upper spin bearing for a washer can solve many issues such as loud and odd noises, or leaking water. Replacing the spin bearing could solve these issues. The tools needed for t...

$1.42

INSERT

$9.26

CLAMP

Clamp used for hoses.

$29.13

Horizontal Spring

This is a horizontal spring, but you may know it as a suspension spring, and it is a part for your washing machine. Its function is to stabilize the outer tub by keeping it balanced. In order to make this repair you will need a putty knife, and a Phillips head screwdriver. This spring is roughly 1 inch thick by 4 inches long, it is chrome colored, and has two hooks on either end to make your repair easier. Take note that this piece is sold individually.

$8.28

SPRING

$5.98

Agitator Screw

This is the bolt (screw) that holds the agitator in place.

$30.10

Splash Cover Seal

The tub ring seal or splash cover seal is used for washers. This part seals the tub cover to the outer one and prevents water leakage from around the tub ring. If your seal is dama...

$29.47

Tension Spring

This tension spring works in conjunction with the idler pulley. The spring is part of your top load washing machine assembly. The most likely reasons for needing to replace the tension spring is if you notice that your washer is not spinning or agitating, the drive belt has come loose, and the idler pulley is no longer secure. To access this part, you will need to remove the front of your washer. The spring is located underneath the bottom of the tub. This is a genuine OEM part that comes right from the manufacturer.

$7.44

Agitator Spacer

Use in conjunction with the agitator screw.

$39.69

Water Inlet Hose Assembly

This water inlet hose is used in washers. The hose connects the washer water inlet valve to the water supply in your home. There are two solenoids on the valve, which are referred to as coils, and there are two wires attached to each solenoid that should be labelled to ensure they are properly reconnected after replacing the new hose. Over time, your hose can begin to leak which can lead to floods. Replacing your hose earlier on can prevent this problem. Refer to the diagram provided by the manufacturer for installation instructions. Remember to unplug your appliance from the power source before beginning this installation project.

$8.91

SPRING

$6.94

Screw - Sold Individually

$290.61

Timer

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.

$36.37

Pump to Tub Hose - Black

All Parts for the SWS1233HS0
15-28 of 106